Airbus Concludes ATTOL With Fully Autonomous Flight Tests


Reading time ( words)

Following an extensive two-year flight test programme, Airbus has successfully concluded its Autonomous Taxi, Take-Off and Landing (ATTOL) project.

In completing this project, Airbus has achieved autonomous taxiing, take-off and landing of a commercial aircraft through fully automatic vision-based flight tests using on-board image recognition technology - a world-first in aviation.

In total, over 500 test flights were conducted. Approximately 450 of those flights were dedicated to gathering raw video data, to support and fine tune algorithms, while a series of six test flights, each one including five take-offs and landings per run, were used to test autonomous flight capabilities.

The ATTOL project was initiated by Airbus to explore how autonomous technologies, including the use of machine learning algorithms and automated tools for data labelling, processing and model generation, could help pilots focus less on aircraft operations and more on strategic decision-making and mission management. Airbus is now able to analyse the potential of these technologies for enhancing future aircraft operations, all the while improving aircraft safety, ensuring today’s unprecedented levels are maintained.

Airbus will continue research into the application of autonomous technologies alongside other innovations in areas such as materials, alternative propulsion systems and connectivity. By leveraging these opportunities, Airbus is opening up possibilities for creating new business models that will transform how aircraft are developed, manufactured, flown, powered and serviced.

The rapid development and demonstration of ATTOL’s capabilities was made possible due to a cross-divisional, cross-functional, global team comprising of Airbus engineering and technology teams, Airbus Defence and Space, Acubed (Project Wayfinder), Airbus China and ONERA under the leadership of Airbus UpNext.

Share

Print


Suggested Items

Understanding MIL-PRF-31032, Part 6

12/08/2020 | Anaya Vardya, American Standard Circuits
Concluding this six-part discussion on understanding the military printed circuit board performance standard MIL-PRF-31032, Anaya Vardya the remaining procedure required to address the unique requirements of the military.

Understanding MIL-PRF-31032, Part 5

11/17/2020 | Anaya Vardya, American Standard Circuits
Continuing with Part 5 of the discussion on understanding the military PCB performance standard MIL-PRF-31032, Anaya Vardya discusses the remaining three new procedures to address the unique requirements of the military.

Additive Electronics TechXchange: NSWC Crane and Lockheed Martin Presentations

10/27/2020 | Happy Holden, I-Connect007
The Additive Electronics TechXchange this year was a virtual event. Happy Holden covers two presentations, including “Very High-Density Investigation Project” by Steve Vetter of the NSWC Crane Naval Facility and "Electronics Additive Manufacturing for Defense and Space" by Kourtney Wright, Ph.D., of Lockheed Martin Advanced Technology Center.



Copyright © 2021 I-Connect007. All rights reserved.