Keysight Technologies Delivers the New Infiniium MXR-Series Mixed Signal Oscilloscopes
May 13, 2020 | Keysight Technologies, Inc.Estimated reading time: 2 minutes
Keysight Technologies, Inc., a leading technology company that helps enterprises, service providers and governments accelerate innovation to connect and secure the world, announced the first oscilloscope with 8 analog channels at 6 GHz and 16 simultaneous digital channels, enabling customers to reduce test bench and workflow complexity to achieve higher performance as well as accurate and repeatable multi-channel measurements in a single instrument.
High-speed digital designs, power integrity verification, Wi-Fi 6, IoT, IIoT and imaging and gallium nitride (GaN) semiconductors utilize frequencies between 2 GHz and 6 GHz that are currently underserved or require costly trade-offs. Testing these new products requires time- and frequency-domain equipment capable of simultaneous analog and digital channels, ideally with software enabled protocols, standards, built-in test assistance, and test team remote collaboration.
The new Infiniium MXR-Series mixed signal oscilloscope offers state-of-the-art ASIC-driven processing resulting in 8 powerful instruments in one, including a real-time spectrum analyzer (RTSA), oscilloscope, digital voltmeter (DVM), waveform generator, Bode plotter, counter, protocol analyzer, and logic analyzer. It is complemented by an extensive suite of software solutions focused on power integrity, high-speed digital test, and verification. Built-in software includes a fault hunter function that speeds root cause identification and resolution of rare or randomly occurring errors.
“Today’s engineers are faced with a new reality where they need affordable access to accurate and repeatable multi-channel measurements in a work environment that extends from the bench and beyond,” said Kiran Unni, vice president, Industrial Americas, Frost & Sullivan. “As a leader in test and measurement, Keysight has applied their unique expertise to fill an important gap that enables engineers across a range of industries to use one instrument to produce the measurements they need to deliver products with speed and quality."
The Keysight Infiniium MXR series oscilloscope helps engineers get from symptom to resolution fast with the following key customer benefits:
- Eight powerful instruments in one reduces bench clutter, setup and test time, while minimizing crosstalk issues. Incorporating a real-time spectrum analyzer achieves a 100 percent probability of detection in the frequency domain, even for asynchronous errors.
- A built-in fault hunter function learns normal signals and compares them over time to find abnormal signals, capturing everything else that occurs when the abnormal signals happen. This results in rapid problem resolution for troubleshooting irregular, random or spurious signals.
- Simultaneous 8 analog channels and 16 digital channels enable monitoring and analysis of complex signal interactions. Coupled with 3X higher bandwidth than any other 8 channel oscilloscopes, it allows test engineers to open a wider and more insightful window into designs.
- Powerful remote collaboration with PathWave Infiniium Offline Analysis software enables design teams to do extensive analysis and data manipulation after bench measurements are complete, enhancing the efficiency and effectiveness of the test bench.
“The Infiniium MXR-Series benefits from a unique combination of Keysight’s technology and solution expertise,” stated Jay Alexander, CTO at Keysight Technologies. “This innovative family joins Keysight’s portfolio of oscilloscope solutions—a portfolio that addresses a wide range of application requirements—from low to very high frequencies, economic to high performance, and foundational measurements to advanced analysis and visualization.”
Suggested Items
Nanotechnology Market to Surpass $53.51 Billion by 2031
04/25/2024 | PRNewswireSkyQuest projects that the nanotechnology market will attain a value of USD 53.51 billion by 2031, with a CAGR of 36.4% over the forecast period (2024-2031).
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
D Coupon Testing and Data Insights With GreenSource Fabrication
04/17/2024 | Marcy LaRont, PCB007 MagazineMarcy LaRont spoke with Steve Karas of GreenSource Fabrication at the SMTA UHDI conference in March. He presented a case study that GreenSource undertook with a customer on critical via reliability with advanced materials and used the experience to highlight the importance and effectiveness of D coupon testing. He also discussed GreenSource’s approach to data aggregation and a new system they developed to use collected data effectively.
Three Industry Leaders Receive IPC President’s Award
04/17/2024 | IPCIn recognition of their leadership and significant contributions of time and talent to IPC and the electronics industry, three IPC volunteers were presented with the IPC President’s Award at IPC APEX EXPO in Anaheim, Calif., on April 9, 2024.
Yamaha to Showcase Latest-generation Assembly Equipment and Software Tools at SMTconnect
04/16/2024 | Yamaha Robotics SMT SectionYamaha Robotics SMT Section will team with its distributor ANS Elektronik to showcase innovations for high-speed surface mount assembly at SMTconnect 2024.