Parrot to Manufacture Short-range Reconnaissance Drone Prototypes for DoD
April 20, 2020 | GlobeNewswireEstimated reading time: 2 minutes
Parrot has passed another milestone in the United States Army’s Short Range Reconnaissance drone program. As the final steps of this selection process, Parrot will participate in an operational assessment to support an Army production award decision. In anticipation of an increased demand signal from the Department of Defense, Parrot will start manufacturing prototypes of its dedicated drone in the United States of America.
The mature prototype presented by Parrot, designed with carefully selected components, has now been approved for initial manufacturing. To support Parrot's commitment to U.S. industry capabilities, Parrot is currently finalizing its U.S. production chain with its partner NEOTech to build its final prototype batch for delivery to the U.S. Army and the Defense Innovation Unit in July 2020. The final prototype assembly includes the installation at NEOTech facility of all software developed by Parrot in Paris (France) ensuring high IP protection with no data dissemination. NeoTech and Parrot are also partnering to achieve the highest quality standard in the industry, to meet the U.S. Army requirements.
With over 40 years of heritage in electronics manufacturing, NEOTech specializes in high-reliability programs primarily in the Aerospace and Defense industry, Medical Products, and High-Tech Industrial markets. NEOTech has a highly talented engineering group and multiple manufacturing locations throughout the U.S., and is well recognized for its excellent customer service and high-level industry specific certifications. This partnership agreement reinforces Parrot’s strategy to expand in the U.S. through a dedicated approach of the Defense & Security markets.
“Parrot is honored to work with the DoD on this highly strategic project,” said Laurent Rouchon, VP Security & Defense at Parrot. “We have successfully met the high standards set over the last 12 months on the prototype efforts and we look forward to entering this final phase and launching production in the USA.”
In April 2019, the U.S. Army and the Defense Innovation Unit selected Parrot and 5 additional commercial drone manufacturers to develop Short Range Reconnaissance prototype drones for military use. As a result of the award, Parrot developed a prototype of the drone between May and November of 2019. Parrot focused the company’s Paris based research and development efforts toward engineering a drone dedicated to the U.S. Army specifications. A prototype unit was finalized in November 2019, and the initial testing phase continued through January 2020. The initial positive results have encouraged Parrot to begin exploring the industrialization phase in early 2020.
Suggested Items
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.
Real Time with... IPC APEX EXPO 2024: Final Finishes and IC Substrate Manufacturing
04/24/2024 | Real Time with...IPC APEX EXPOEditor Marcy LaRont and Richard DePoto, Uyemura's Business Development Manager, engage in a comprehensive discussion about the positive aspects of the show, the benefits of RAIG in final finishes, and the hurdles faced when upgrading your surface finish. Also discussed are the role of Uyemura's MEC pretreatment agents in IC substrate manufacturing and the importance of collaboration and knowledge sharing.
Women MAKE Awards Recognizes GlobalFoundries’ Jennifer Robbins and Katelyn Harrison for Manufacturing Excellence
04/24/2024 | GlobalFoundriesThe Manufacturing Institute (MI)—the workforce development and education affiliate of the National Association of Manufacturers—honored two outstanding women from GlobalFoundries (GF) at their annual Women MAKE Awards. Jennifer (Jenny) Robbins, Senior Director, Central Facilities, was recognized as a 2024 Women MAKE Awards Honoree, while Katelyn Harrison, Senior Integration Engineer, was honored as an Emerging Leader.
GlobalFoundries Commits to Achieving Net Zero Emissions and Carbon-Neutral Power by 2050
04/23/2024 | GlobalFoundriesGlobalFoundries (GF) is furthering its commitment to sustainable operations and fighting climate change with the announcement of two new long-term goals to achieve net-zero greenhouse gas (GHG) emissions and 100% carbon-neutral power by 2050.