Zero Defects International and Skyla Providing Uninterrupted CAM Services


Reading time ( words)

Zero Defects International (ZDI) and its strategic partner, Skyla have announced measures taken to maintain and, as necessary, increase their printed circuit board front-end engineering CAM service capabilities in response to demand from their North American customer base.  Due to shelter in place restrictions, many companies are in need of extra CAM capacity in order to fulfill demand for defense, aerospace and medical products.  Accordingly, ZDI/Skyla will continue to provide services with normal response times and at high levels of quality.

In California ZDI has configured operations to safely protect employees as well as all customers to which services are provided remotely as usual.  In Erode, India Skyla has also re-configured their operations to be in compliance with India's comprehensive business and social shut-down requirements. Importantly, all data security protocols remain solidly in place.

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.



Copyright © 2020 I-Connect007. All rights reserved.