I-007e Micro Webinar: Primary Flight Control Case Study on Condensation and Coverage


Reading time ( words)

The seventh episode of the popular webinar series “Coatings Uncoated!” is now available to view. Author of The Printed Circuit Assembler’s Guide to Conformal Coatings for Harsh Environments and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation. If you are in the assembly business, an EMS, or responsible for specifying conformal coating and/or encapsulation, then this free series is for you.

Military and aviation applications represent some of the toughest challenges, as failure is simply not an option. In this case study, Phil explores an aviation-based customer application and the resultant solutions provided by Electrolube.

Electrolube_Play_7.jpgWatch the latest segment, “Primary Flight Control Electronics Case Study: Condensation and Coverage,” in just six minutes! (Other things you can do in six minutes: declutter your inbox, do a six-minute ab workout, read too many political tweets. This is way better.)

In this engaging, 12-part webinar series, Kinner examines conformal coating chemistries in further detail, including their properties, applications, issues to be mindful of, and the processes you should follow to achieve a successful coating outcome. The entire “Coatings Uncoated!” webinar series can be viewed in an hour and covers a comprehensive range of hot topics and application-relevant case-study overviews, as well as back-to-basic subject matter and issues, such as condensation and contamination. Most of the 12 segments can be viewed in five minutes or less.

Got five minutes? Visit the site: Coatings Uncoated Webinar Series.

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

Greg Vance to Serve as SMTA Interim President

04/07/2020 | Nolan Johnson, I-Connect007
Nolan Johnson talks to Greg Vance about taking over the SMTA Board President's role through September. Discussion includes an update on multiple board chair changes, and an update on the board's work to achieve their current set of objectives.



Copyright © 2020 I-Connect007. All rights reserved.