Boeing Delivers the First F/A-18 Service Life Modification Jet to U.S. Navy
February 6, 2020 | BoeingEstimated reading time: 1 minute
Boeing has given an F/A-18 a new lease on life after delivering the first Super Hornet under the Service Life Modification program to the U.S. Navy. The second SLM jet will deliver by the end of the month, and Boeing will deliver the third F/A-18 in April.
The initial Super Hornets delivered from the program will extend the service life from 6,000 to 7,500 flight hours. Future modification plans in the early 2020s will enable the jets to fly 10,000 hours and incorporate the new Block III capabilities.
“SLM is going to provide a critical resource for the Navy to re-capitalize on long-serving aircraft to return them to the fleet in a near new condition,” said Capt. Stephen May, PMA-265 co-lead for E/F/G Air Vehicles. “It will reduce burden on our maintainers, our supply system and our depot level assets within the enterprise.”
There are now 15 Super Hornets in the SLM program on production lines in St. Louis and San Antonio. It takes 18 months to complete modifications on an F/A-18, although that time will be driven down to one year as the program progresses. Boeing will deliver five more Super Hornets this year.
The Block III conversion will include enhanced network capability, conformal fuel tanks, an advanced cockpit system, signature improvements and an enhanced communication system. The updates are expected to keep the F/A-18 in active service for decades to come.
For more information on Defense, Space & Security, visit www.boeing.com. Follow us on Twitter: @BoeingDefense and @BoeingSpace.
Suggested Items
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.