I-007e Micro Webinars Releases Part 2 in ‘Coatings Uncoated!’ Series


Reading time ( words)

The second part of the popular webinar series, Coatings Uncoated, is now available to view. Author of The Printed Circuit Assembler’s Guide to... Conformal Coatings for Harsh Environments and topic expert Phil Kinner from Electrolube shares highly focused educational information on conformal coating and encapsulation. If you are in the assembly business, an EMS, or responsible for specifying conformal coating and/or encapsulation, then this free series is for you.

Got five minutes? Visit iconnect007.com/webinar/cu and watch the latest segment, Never Underestimate the Importance of the Application Process, which examines the pivotal role that application plays in the overall success of coating, and presents a great opportunity to grasp the importance of the process.

I-007eBooks and I-007e Micro Webinars: Your premier educational resource for circuit board design, manufacture and assembly.

I-Connect007 takes the on-demand webinar to a new level. A perfect companion to our I-007eBook series, these bite-sized webinars are released weekly, exclusively at I-Connect007, and also available all at once for those who can’t wait for the next installment

Electrolube’s Phil Kinner has been providing I-Connect007 readers with information, guidance and practical tips on the uses and applications of conformal coatings through Team Electrolube’s “Sensible Design” columns published over the last four years. Now, in his engaging, new, 12-part webinar series, Phil will delve even deeper into the subject, examining conformal coating chemistries in further detail, including their properties, applications, issues to be mindful of and the processes you should follow to achieve a successful coating outcome. The entire “Coatings Uncoated!” webinar series can be viewed in an hour and covers a comprehensive range of hot topics and application-relevant case-study overviews, as well as back-to-basic subject matter and issues, such as condensation and contamination. Each of the 12 segments can be viewed in about five minutes.

Share

Print


Suggested Items

The Changing Landscape

10/31/2019 | Nolan Johnson, I-Connect007
SMTAI featured two keynote speakers: Adam Steltzner, a NASA Jet Propulsion Laboratory (JPL) engineer who led the Mars Science Laboratory's Entry, Descent, and Landing (EDL) Phase for the Curiosity rover and the chief engineer for the Mars 2020 Project; and Dr. Mike Hawes, Lockheed Martin Vice President for Human Space Exploration and Orion Program Manager. The energy at both keynotes was palpable. We’re returning to extra-orbital space with human crews, and the demands of such missions drive innovation.

Laserssel Brings High-speed Soldering to New Application Areas

06/10/2019 | Barry Matties, I-Connect007
In this interview with I-Connect007, Denis Barbini, general manager of Laserssel, talks about the company's new laser-selective reflow solution aimed at reducing a typical reflow oven’s 10-minute cycle down to just 10 seconds as well as the overall benefits manufacturers could see from streamlining this process.

Video from productronica 2017: Nordson ASYMTEK Highlights Bulk Dispensing Technology

11/16/2017 | I-Connect007
At this week’s productronica, Nordson ASYMTEK highlights its the new Helios SD960 bulk and two-component dispensing system. Almar Thewissen, program manager for Industrial Applications, EMEA, at Nordson, discusses its applications with I-Connect007 Technical Editor Pete Starkey.



Copyright © 2020 I-Connect007. All rights reserved.