Airbus BelugaXL Enters Service, Adding XL Capacity to the Fleet
January 15, 2020 | Airbus GroupEstimated reading time: 1 minute
The BelugaXL has entered into service, providing Airbus with 30% extra transport capacity in order to support the on-going production ramp-up of commercial aircraft programmes.
The aircraft, which is an integral part of Airbus’ industrial system, made its first operational flight on 9 January. This is the first of six BelugaXL to begin work alongside the BelugaST predecessors, with the additional aircraft being introduced between 2020 and 2023.
Launched just over five years ago, in November 2014, the entry into service milestone marks yet another successful achievement for the internal aircraft programme that was awarded Type Certification by the European Aviation Safety Agency (EASA) in November 2019, following an intensive flight test campaign that saw the BelugaXL complete more than 200 flight tests, clocking over 700 flight hours.
At 63 metres long and 8 metres wide, the BelugaXL has the largest cargo bay cross-section of all existing cargo aircraft worldwide. The BelugaXL can carry two A350 XWB wings compared to the BelugaST, which can only carry one. With a maximum payload of 51 tonnes, the BelugaXL has a range of 4,000 km. (2200nm).
The BelugaXL is based on an A330-200 Freighter, enabling the re-use of existing components and equipment, and is powered by Rolls-Royce Trent 700 engines. The lowered cockpit, the cargo bay structure and the rear-end and tail were newly developed jointly with partners, giving the aircraft its distinctive look.
The BelugaXL is the latest addition to Airbus’ transportation portfolio. While air transport remains the primary method for transporting large aircraft components, Airbus also uses road, rail and sea transport to move parts between its production sites. Like the BelugaST, the aircraft will operate from 11 destinations in Europe, continuing to strengthen industrial capabilities and enabling Airbus to deliver on its commitments.
Suggested Items
US Satellite D2D Market Expected to Hit $6.5B by 2027, Taiwanese PCB and Antenna Manufacturers Set to Enter Supply Chain
03/14/2024 | TrendForceTrendForce’s projections foresee that the US satellite direct-to-device (D2D) market is expected to undergo significant growth, expanding from $430 million in 2023 to $6.5 billion by 2027 at a CAGR of 36%.
AAT's Patented Rotational Spraying Method Ensures Superior Cleaning Performance
03/07/2024 | Austin American Technology (AAT)Austin American Technology (AAT) is pleased to announce that its patented rotational spraying method ensures superior cleaning performance, delivering consistent results for critical electronic components.
Absolute EMS Harnesses the Power of Nitrogen to Elevate Electronic Manufacturing Quality
02/27/2024 | Absolute EMS, Inc.Absolute EMS, Inc., an award-winning EMS provider of turnkey contract manufacturing services, continues to harness the power of nitrogen to enhance the quality, reliability and efficiency of their manufacturing processes. The company’s state-of-the-art facilities are equipped with nitrogen reflow ovens and selective soldering machines, ensuring consistent, high-quality results for every project.
Altus Adds MagicRay Through-Hole Inspection to Product Line-Up
02/26/2024 | Altus GroupAltus Group, a leading supplier of capital equipment for the electronics industry in the UK and Ireland, has added to their product line-up with MagicRay’s latest innovation in inspection, the V320 THT Pre-Reflow AOI system.
TECHNICAL PAPER: Novel Automatic Repair of Populated PCBs in a Cost-effective and Adaptive Way
02/21/2024 | Essemtec, a NanoDimension DivisionRepair of soldered components is a constant necessity in the electronics industry. Product performance enhancement, damaged components, and exchange of wrong placed components are some of the motivations behind a repair. Dispensing and placing a 400 μm pitch component manually is very time consuming and could cause collateral damage to the already populated components. A novel automatic repair method and tools with no human interaction were developed. Learn about this method…