Cirrus Aircraft Introduces Autonomous Flight with Safe Return Emergency Autoland
October 31, 2019 | GlobeNewswireEstimated reading time: 3 minutes
Cirrus Aircraft, the global leader in personal aviation, ushered in a new era of innovation today with the introduction of Safe Return™ – a revolutionary emergency autoland system that enables passengers to land the Vision Jet™ with just the touch of a single button. Once activated when available, Safe Return assumes control of the aircraft and transforms the Vision Jet into an autonomous vehicle that navigates to the nearest suitable airport for landing, communicates with air traffic control, lands and brings the aircraft safely to a complete stop. The Vision Jet, with both Safe Return and the award-winning Cirrus Airframe Parachute System® (CAPS®), provides a comprehensive, must-have total safety solution unique to G2 Vision Jet operators.
“Our mission is to make personal aviation more accessible by continuing to improve passenger comfort and safety,” said Zean Nielsen, Cirrus Aircraft Chief Executive Officer. “Safe Return delivers the next step towards autonomous flight, bringing a new level of confidence to the overall flying experience by providing the ultimate level of safety and control to passengers. Together, with the Cirrus Airframe Parachute System® (CAPS®), we have once again set a new standard for safety in personal air travel.”
Easily accessible by passengers in the Vision Jet cabin, Safe Return is activated by the touch of a button when available. Once pressed, the autonomous system analyzes terrain and datalink weather to determine the optimal airport for landing, and simultaneously begins communication with Air Traffic Control (ATC). Powered by the Perspective Touch+TM by Garmin® flight deck, Safe Return utilizes all available aircraft data streams, including available fuel, to safely navigate the Vision Jet to the identified airport and transition on to final approach for the appropriate runway based on ground winds. Autothrottle – launched earlier this year on the new G2 Vision Jet –and the automatic flight control system manage the aircraft’s speed, altitude and path, while the system automatically lowers the flaps and landing gear on final approach. Safe Return culminates in the aircraft making a fully autonomous landing on the intended runway and coming to a complete stop, allowing passengers to exit the aircraft.
Included during this entire process is constant communication with ATC – another layer of autonomy that provides assurance to passengers experiencing a critical situation. Upon activation, Safe Return immediately transmits an emergency message to ATC. Using text and speech technology, the system communicates the aircraft’s intentions over the appropriate ATC frequency, the 121.5 emergency voice frequency, and also switches to the universal emergency transponder code. ATC is automatically updated at regular intervals of the aircraft’s location, emergency situation and intended airport landing location. These communications begin the process of activating emergency services at the airport of intended landing to assist the passenger and pilot upon arrival. Safe Return can be easily disengaged by the pilot with a simple press of the Autopilot disconnect button on the yoke if a passenger inadvertently activates the system.
In 2016, Cirrus Aircraft ushered in a new era in personal transportation with the FAA certification of the world’s first single-engine Personal Jet – the Vision Jet. The turbine aircraft defined a new category in aviation – the Personal Jet™ – with its spacious pilot and passenger-friendly cabin featuring panoramic windows, reclining seats, comfortable legroom for five adults and two children and the only turbine aircraft with a whole airframe parachute system as standard equipment. Earlier this year, Cirrus Aircraft unveiled and began delivery of the G2 Vision Jet, offering enhanced performance, comfort and safety with increased cruise altitude, speed and range, and a newly-upgraded Perspective Touch+TM by Garmin® flight deck. The company expects to begin delivery of Vision Jets equipped with Safe Return in early 2020.
More information on Safe Return and the G2 Vision Jet can be found at: cirrusaircraft.com/visionjet.
Suggested Items
Lockheed Martin Australia, The Department Of Defence Sign Strategic Partnership Head Contract
04/26/2024 | Lockheed MartinLockheed Martin Australia signed a landmark AUD$500 million contract with the Department of Defence to build Australia’s future Joint Air Battle Management System under project - AIR6500 Phase 1 (AIR6500-1).
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.