Base Station Vendors Turn to Sectorization, Active Antenna Systems, and Cell Shaping to Tackle 5G
October 16, 2019 | ABI ResearchEstimated reading time: 1 minute
As 5G networks start commercial operations in countries including the United States, South Korea, China, and Japan, Base Station Antenna (BSA) vendors are innovating and coming to grips with the complex feature sets and performance demands required in a modern BSA. ABI Research identifies three trends in BSA design which improve the performance, enhance the features, and reduce the costs associated with a modern BSA.
“Sectorization, Active Antenna Systems (AAS) and Cell Shaping are the three overarching trends emerging from vendor’s roadmaps which are used to tackle the demands of 5G,” says Nick Marshall, Research Director at ABI Research.
Higher order sectorization using multi-port/multi-band and/or multi-beam antennas is being used to upgrade a cell site from a standard three sectors to six sectors or more. “Sectorization increases the number of sectors without increasing the number of antennas or radiation centers on the tower and represents important cost savings because towers are increasingly occupied by multiple BSAs and other equipment,” continues Marshall.
Active Antenna Systems (AASs) are the second trend. An AAS contains active radio electronics inside the BSA radome with the antenna/radio combination connected back to the to the baseband with fiber. “Although more expensive than legacy passive antennas, AASs enable high-order and massive MIMO features for sector throughput enhancements, reductions in cable losses and power consumption,” says Marshall.
Included in AAS are a new type of hybrid active/passive BSA which are antenna systems integrating massive MIMO antennas with passive antennas and which share electronics, radio frequency components, and chassis between the active and passive antennas. “As a compact single unit, hybrid active/passive antennas reduce wind load and, since components are shared, offer a lower initial cost when compared to traditional options,” says Marshall.
The third overarching driver is proactive cell shaping, where beamforming is used to shape or sculpt overall cell coverage. Sector sculpting in the cell shapes the Radio Frequency (RF) radiation pattern with directional antennas, which can be steered both in azimuth and elevation. Sculpting delivers precise wireless coverage with minimal interference with neighboring cells.
“The key takeaway from these and other innovations is that antenna vendors are rising to the complex challenges of delivering 5G with highly innovative and technically elegant BSA designs,” concludes Marshall.
Suggested Items
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
CentraTEQ to Showcase Wide Range of Vibration & Environmental Test Systems at Battery Tech Expo 24
03/26/2024 | CentraTEQEnvironmental and vibration test specialists CentraTEQ are excited to be exhibiting at the upcoming Battery Tech Expo, scheduled to take place at Silverstone on April 25, 2024.
SEMI 3D & Systems Summit To Spotlight Trends In Hybrid Bonding, Chiplet Design And Environmental Sustainability
03/26/2024 | SEMILeading experts in 3D integration and systems for semiconductor manufacturing applications will gather at the annual SEMI 3D & Systems Summit, 12-14 June, 2024,
iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs
03/25/2024 | IPCToday’s system solutions combine more varied functionality, such as digital, analog, optical, micro-mechanical, etc., packed into smaller form factors. As a result, electronics manufacturing has to deliver increasingly complex integration of diverse technologies with system designs that blur the distinction between chip, package, board, and assembly.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.