MicroCare to Exhibit Cleaning Solutions at SMTA Guadalajara
September 26, 2019 | MicroCare CorporationEstimated reading time: 2 minutes
MicroCare Corporation, a leading global manufacturer of critical cleaning, coating and lubrication products, will present its line of products when the cleaning experts exhibit at SMTA Guadalajara on October 23-24, 2019.
Taking center stage is Tergo High Performance Flux Remover. As a non-flammable, low global warming cleaning fluid, it has been specifically engineered for high volume production cleaning of printed circuit boards in vapor degreasing systems.
It features a non-volatile additive specifically designed to clean difficult to remove no-clean solder pastes and stubborn white flux residue. It also works well to clean water-soluble (OA) fluxes and lead-free materials. Because of its unique formulation, companies can clean flux from PCBs faster, more effectively and at a lower cost while meeting increasingly strict environmental regulations.
Tergo High Performance Flux Remover can be used as a direct replacement for many older vapor degreasing chemistries like nPB and TCE that are being phased-out under environmental, health, or safety pressures.
“Vapor degreasing is significantly less energy-intensive than aqueous cleaning and therefore more environmentally friendly. It is also generally faster and gentler on delicate circuitry; cleaning small complex shapes far better than water-based systems,” said Ernesto Pollano, MicroCare Regional Sales Manager for Mexico.
“When used together with highly advanced cleaning fluids like Tergo High Performance Flux Remover, vapor degreasing is a very effective method to clean PCBs.”
In addition to the vapor degreasing fluids, MicroCare will showcase their extensive line of aerosol flux removers for use on the benchtop. The milder, fast-drying No-Clean Flux Remover - VeriClean is ideal at removing no-clean fluxes from printed circuit board assemblies while the very strong, non-flammable Lead-Free Flux Remover PowerClean successfully removes white residue found with lead-free fluxes.
Working in combination with all MicroCare aerosol flux removers is the TriggerGrip Dispensing Tool. Using the Trigger Grip saves money by reducing solvent usage by 66% and ensuring the can empties completely. It also enhances worker safety by limiting exposure to the cleaning fluid fumes.
To find out more about the extensive MicroCare range of critical cleaning, coating and lubrication products, visit booth 525 at SMTA Guadalajara on October 23-24, 2019.
About MicroCare Corporation
Fast-growing MicroCare Corporation is a global company based in New Britain, CT. Since 1983 it has been the leading manufacturer of environmentally-progressive fluids and tools used for critical cleaning. These products are supplied to industries as diverse as electronics, metal finishing, transportation, communications, medical devices and aerospace with a goal of helping those companies improve the products they make. MicroCare also features a team of chemists and technical engineers to help companies use these fluids properly, safely and more economically.
MicroCare Corporation has an ISO 9001:2015 registered quality system and is continually improving and expanding its range of products with a full R&D lab located in New Britain, CT. MicroCare has two manufacturing facilities in New Britain, CT and a global logistics center in Rocky Hill, CT in addition to facilities in the UK, Belgium and Singapore. MicroCare products include the MicroCare fluids, Sticklers fiber optic cleaners and MicroCare Medical among its brands.
Suggested Items
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.
Hentec/RPS Publishes an Essential Guide to Selective Soldering Processing Tech Paper
04/17/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, announces that it has published a technical paper describing the critical process parameters that need to be optimized to ensure optimal results and guarantee the utmost in end-product quality.
Empowering Electronics Assembly: Introducing ALPHA Innolot MXE Alloy
04/16/2024 | MacDermid Alpha Electronics SolutionsIn the rapidly evolving electronics industry, where innovation drives progress, MacDermid Alpha Electronics Solutions is committed to setting a new standard. Today, we are pleased to introduce ALPHA Innolot MXE, a revolutionary alloy meticulously engineered to address the critical needs of enhanced reliability and performance in modern electronic assemblies.
New Book on Low-temperature Soldering Now Available
04/17/2024 | I-Connect007I-Connect007 is pleased to announce that The Printed Circuit Assembler’s Guide to… Low-temperature Soldering, Vol. 2, by subject matter experts at MacDermid Alpha Electronics Solutions, is now available for download.
Inkjet Solder Mask ‘Has Arrived’
04/10/2024 | Pete Starkey, I-Connect007I was delighted to be invited to attend an interactive webinar entitled “Solder Mask Coating Made Easy with Additive Manufacturing,” hosted by SUSS MicroTec Netherlands in Eindhoven. The webinar was introduced and moderated by André Bodegom, managing director at Adeon Technologies, and the speakers were Mariana Van Dam, senior product manager PCB imaging solutions at AGFA in Belgium; Ashley Steers, sales manager at Electra Polymers in the UK; and Dr. Luca Gautero, product manager at SUSS MicroTec Netherlands.