Register Now for the IPC Electronics Materials Forum


Reading time ( words)

The IPC Electronics Materials Forum is an interactive 3-Day technical forum focused on developments in materials and processes associated with advanced electronics assembly and manufacturing. While it is possible to envision many future technologies, they will never be fully realized without the materials and processes to manufacture them. New and emerging technologies such as semi additive processes are expanding our existing materials set targeted for the applications of 5G, automotive, defense and aerospace, and medical electronics. 

This conference which will be held November 5–7, 2019 in Minneapolis (Bloomington), Minnesota, will focus on materials for board fabrication, assembly, and post-assembly protection.

Here’s a sneak peek at some of our distinguished speakers:

  • Dr. Ning-Cheng Lee, Indium Corporation
  • Laura Cohen, Ph.D. and Stan Rak, Continental Automotive Systems, Inc.
  • Mike Vinson, Tara Dunn, Averatek
  • Audra Thurston, Calumet Electronics Corporation
  • Robert Carter, FaradFlex
  • Shahriar Naghshineh, LBN, Inc.
  • Sarah Czaplewski, IBM
  • Jessica Reed, Apollo Seiko
  • Jim Stockhausen, AltanaPDG Inc.
  • Rakesh Kumar, Specialty Coating Systems, Inc.
  • Maria Kogia, Jean-Marc Lucatelli, Donna Dykeman Ph.D., ANSYS/GRANTA, Cambridge UK 

Who should attend? This forum is ideal for process engineers, those developing new technology and sourcing materials, and anyone interested in cutting edge technology for the electronics industry. Networking opportunities will be provided throughout.

To register, click here.

Share

Print


Suggested Items

Process Ionic Contamination Test (PICT) Standard Roundtable With Industry Experts

04/22/2020 | I-Connect007
With standards committees set to release the first of four new test standards, industry experts discussed the process ionic contamination test (PICT) standard, which was recently approved by the IEC for publication. Roundtable participants included Teresa Rowe, senior director of assembly and standards technology at IPC, Graham Naisbitt, chairman and CEO of Gen3, Jason Keeping, corporate process development at Celestica, and Doug Pauls, principal materials and process engineer at Collins Aerospace.

SMTA Europe’s Electronics in Harsh Environments Conference and Exhibition: A Taste of Things to Come

04/14/2020 | Pete Starkey, I-Connect007
SMTA Europe’s Electronics in Harsh Environments Conference has become a must-attend annual event; unfortunately, it also became another casualty of the COVID-19 lockdown. Scheduled to take place in Amsterdam, the Netherlands, from April 21–23, 2020, it has now been postponed until December 1–3. Pete Starkey reports on a preview seminar presented by SMTA Europe.

This Month in SMT007 Magazine: Exclusive Interview With Burt Rutan, Aerospace Legend

04/03/2020 | I-Connect007 Editorial Team
If you follow advancements in aerospace technologies and expeditions, then you know the name Burt Rutan. Described by Newsweek as “the man responsible for more innovations in modern aviation than any living engineer,” Rutan is a bold visionary with a passion for the advancement of technology, who has designed 46 aircraft throughout his career. Following his IPC APEX EXPO keynote presentation, Rutan stopped by the I-Connect007 booth and shared his thoughts on a wide variety of topics.



Copyright © 2020 I-Connect007. All rights reserved.