Nano Dimension and Harris Receive Grant for ISS Project
May 31, 2019 | Nano DimensionEstimated reading time: 2 minutes
Nano Dimension Ltd. has received a grant approval from the Israel Innovation Authority, for developing hardware, in cooperation with Harris Corporation, that will fly on the International Space Station (ISS) and communicate with Harris’ ground based satellite tracking station in Florida. This project will provide a systematic analysis of 3D printed materials for radio frequency (RF) space systems, especially for Nano-satellites.
The total approved budget for the Israeli portion of this project is approximately $416,000 (NIS 1,500,000), of which the Israel Innovation Authority will finance 40%. According to the terms of the grant, Nano Dimension will pay royalties on future sales up to the full grant amount.
This unique project is being conducted in collaboration with Harris Corporation, a leading technology innovator that provides solutions that connect, inform and protect its clients. The Harris portion of the project is sponsored by a grant from Space Florida. During this one-year project, both companies will optimize the designs of the 3D printing process and RF components and prepare a system for the flight studies at the ISS.
Nano Dimension awarded Space Florida Grant by Governor of Florida Ron DeSantis, and the Israel Innovation Authority
This project has been selected by the Center for the Advancement of Science in Space, the manager of the ISS U.S. National Laboratory, to fly the space flight experiment on the ISS, using the team’s 3D printed materials and circuits. In this project, the companies will pioneer the first of a kind space flight experiment, that will fly in space at low earth orbit for one year on the ISS, helping to understanding how 3D printed circuits, systems, and materials will endure in various space environments.
This project will demonstrate innovative methods for manufacturing new RF systems. Until now, manufacturing of RF systems has remained static for the last 30 years with each circuit in its own “gold box/boxes” interconnected with cables and connectors. With 3D printing, the industry can explore a new manufacturing paradigm, that eliminates manual labor and streamlines production. Another benefit to this technology is a reduction/elimination of wasted material, making it a “green” process.
About Harris Corporation
Harris Corporation is a leading technology innovator, solving customers’ toughest mission-critical challenges by providing solutions that connect, inform and protect. Harris supports government and commercial customers in more than 100 countries and has approximately $6 billion in annual revenue. The company is organized into three business segments: Communication Systems, Space and Intelligence Systems and Electronic Systems.
About Nano Dimension Ltd
Nano Dimension is a leading electronics provider that is disrupting, reshaping, and defining the future of how cognitive connected products are made. With its unique 3D printing technologies, Nano Dimension is targeting the growing demand for electronic devices that require increasingly sophisticated features. Demand for circuitry, including PCBs - which are the heart of every electronic device - covers a diverse range of industries, including consumer electronics, medical devices, defense, aerospace, automotive, IoT and telecom. These sectors can all benefit greatly from Nano Dimension’s products and services for rapid prototyping and short-run manufacturing.
Suggested Items
IDTechEx Report Unveils 3D Electronics Status and Opportunities
04/22/2024 | PRNewswire3D electronics is an emerging manufacturing approach that enables electronics to be integrated within or onto the surface of objects. 3D electronic manufacturing techniques empower new features, including mass customizability, greater integration, and improved sustainability in the electronics industry.
Altus Group Helps BitBox Unlock Productivity and Efficiency Gains with New Reflow Oven
04/22/2024 | Altus GroupAltus Group, a leading provider of capital equipment, has recently assisted BitBox, a UK-based electronics design, engineering and manufacturing company in upgrading its operations with the implementation of a new reflow oven from Heller Industries.
Growth Potential: Electronics Manufacturing Driving Massive Surge in Manufacturing Investment
04/22/2024 | Shawn DuBravac, IPCIn the early months of the pandemic, investment in manufacturing infrastructure, such as plants and production facilities, declined sharply. Real investment dropped over 11%, before finally recovering to pre-pandemic levels in the first half of 2022. Over the past two years, however, several factors have combined to drive manufacturing investment to record levels.
I-Connect007 Editor’s Choice: Five Must-Reads for the Week
04/19/2024 | Marcy LaRont, PCB007 MagazineFor my must-read picks of the week, I’m highlighting Parker Capers, a young professional seeking employment, solid counsel from Dan Beaulieu on what your post-show plan should look like, more information and insight on “chiplets” and the need for secure data transfer standards from columnist Preeya Kuray, as well as Matt Stevenson’s design for reality wisdom. It’s a reminder to download one of our newest books (there are several) you don't want to miss if you are an assembler.
Absolute EMS Champions Collaboration Between Humans and Robots in Modern Manufacturing
04/19/2024 | Absolute EMS, Inc.Absolute EMS, Inc., an award-winning EMS provider of turnkey contract manufacturing services, offers a perfect factory environment that seamlessly blends robotic automation with human expertise.