BAE Systems RAD750 Single Board Computers Guide InSight Mars Landing
January 10, 2019 | BAE SystemsEstimated reading time: 1 minute
On November 26, 2018, NASA landed its InSight spacecraft on Mars after a six month journey to the Red Planet. InSight, which stands for Interior Exploration using Seismic Investigations, Geodesy and Heat Transport made the trip equipped with BAE Systems RAD750 Single Board Computers (SBC) on board. The lander was built by Lockheed Martin in collaboration with NASA’s Jet Propulsion Laboratory.
“Our SBCs commanded a series of critical maneuvers during the six and a half minute entry, descent and landing phase for InSight,” said Jim LaRosa, director of Space Processor and Products. “This mission will bring new understanding of Mars to NASA scientists, and our radiation hardened computers are integral to its success.”
The RAD750 and BAE Systems’ entire suite of SBCs provide next-generation spacecraft with the high-performance onboard processing capability needed to support space missions like InSight— from weather and planetary exploration to communications, surveillance, and national security missions. This is the eighth Mars mission enabled by BAE Systems’ family of advanced high-reliability radiation-hardened electronics.
In addition to the proven RAD750, the company’s latest SBC, RAD5545, delivers exponential improvements in size, speed, and power-efficiency over its predecessors. The SpaceVPX RAD5545 is powered by the radiation hardened general purpose System-on-Chip processor, featuring DDR3 SDRAM, Flash memory, Serial RapidIO®, Spacewire, and General Purpose IO interfaces, with a fully supported expansion port for a custom interface card. Early deliveries will include a VxWorks 7 Board Support Package with Green Hills INTEGRITY and Linux as future options.
BAE Systems also offers a suite of radiation hardened Serial RapidIO network products, including the RADNET 1848-PS, an 18-Port RapidIO Packet Switch, the RADNET 1616-XP Crosspoint, a protocol agnostic SerDes signal circuit switch and replicator, and the RADNET SRIO-EP, a Serial RapidIO endpoint. These networking devices complement the RAD5545 SBC and allow the user to efficiently manage and route data through the system.
Radiation Hardened Computers are produced at BAE Systems’ facility in Manassas, Virginia. The facility is a U.S. Department of Defense Category 1A Microelectronics Trusted Source. BAE Systems’ radiation-hardened electronics have been on board satellites and spacecraft for almost 30 years, delivering long-lasting computing power in extreme environments. The company has provided more than 900 computers from more than 300 satellites, and has provided the computers that power key national space assets such as Juno and InSight.
Suggested Items
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
CentraTEQ to Showcase Wide Range of Vibration & Environmental Test Systems at Battery Tech Expo 24
03/26/2024 | CentraTEQEnvironmental and vibration test specialists CentraTEQ are excited to be exhibiting at the upcoming Battery Tech Expo, scheduled to take place at Silverstone on April 25, 2024.
SEMI 3D & Systems Summit To Spotlight Trends In Hybrid Bonding, Chiplet Design And Environmental Sustainability
03/26/2024 | SEMILeading experts in 3D integration and systems for semiconductor manufacturing applications will gather at the annual SEMI 3D & Systems Summit, 12-14 June, 2024,
iNEMI/IPC White Paper on Complex Integrated Systems Highlights Future Technology and Manufacturing Ecosystem Needs
03/25/2024 | IPCToday’s system solutions combine more varied functionality, such as digital, analog, optical, micro-mechanical, etc., packed into smaller form factors. As a result, electronics manufacturing has to deliver increasingly complex integration of diverse technologies with system designs that blur the distinction between chip, package, board, and assembly.
Synopsys Announces New AI-Driven EDA, IP and Systems Design Solutions At SNUG Silicon Valley
03/25/2024 | PRNewswireSynopsys, Inc. kicked off its annual flagship Synopsys User Group (SNUG) conference in Silicon Valley at the Santa Clara Convention Center with a keynote presentation by Synopsys president and CEO Sassine Ghazi. Ghazi discussed the unprecedented innovation opportunities and challenges that technology R&D teams face in this era of pervasive intelligence.