New Materials Architectures Sought to Cool Hypersonic Vehicles
December 24, 2018 | DARPAEstimated reading time: 1 minute
Hypersonic vehicles fly through the atmosphere at incredibly high speeds, creating intense friction with the surrounding air as they travel at Mach 5 or above—five times faster than sound travels. Developing structures that can withstand furnace-like temperatures at such high speeds is a technical challenge, especially for leading edges that bear the brunt of the heat.
To address this thermal challenge, DARPA recently announced its Materials Architectures and Characterization for Hypersonics (MACH) program. The MACH program seeks to develop and demonstrate new design and material solutions for sharp, shape-stable, cooled leading edges for hypersonic vehicles.
“For decades people have studied cooling the hot leading edges of hypersonic vehicles but haven’t been able to demonstrate practical concepts in flight,” said Bill Carter, program manager in DARPA’s Defense Sciences Office. “The key is developing scalable materials architectures that enable mass transport to spread and reject heat. In recent years we’ve seen advances in thermal engineering and manufacturing that could enable the design and fabrication of very complex architectures not possible in the past. If successful, we could see a breakthrough in mitigating aerothermal effects at the leading edge that would enhance hypersonic performance.”
The MACH program will comprise two technical areas. The first area aims to develop and mature fully integrated passive thermal management system to cool leading edges based on scalable net-shape manufacturing and advanced thermal design. The second technical area will focus on next-generation hypersonic materials research, applying modern high-fidelity computation capabilities to develop new passive and active thermal management concepts, coatings and materials for future cooled hypersonic leading edge applications.
The MACH program seeks expertise in thermal engineering and design, advanced computational materials development, architected materials design, fabrication and testing (including net shape fabrication of high temperature metals, ceramics and their composites), hypersonic leading-edge design and performance, and advanced thermal protection systems.
Suggested Items
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.