The IPC High-Reliability Forum for Mil-Aero and Automotive Sectors
September 24, 2018 | Happy Holden, I-Connect007Estimated reading time: 3 minutes
I had the pleasure of attending IPC’s High Reliability Forum (HRF) in Baltimore in May. As the IPC scripted it, it was a “Technical Conference with a Focus on Electronics Subjected to Harsh-Use Environments.”
HRF included a half-day tutorial on “Achieving Improved Reliability with Failure Analysis” taught by Bhanu Sood, commodity risk assessment engineer, NASA Goddard Space Flight Center.
Michael Carano, the forum moderator, opened HRF at 9 am. Attendance topped 80, with pre-registration at over 90. Michael introduced the keynote speaker for the forum, American Standard Circuits CEO Anaya Vardya, whose keynote highlighted the North American overview of the PCB industry’s challenges. Specific points included:
- Pricing erosion
- Higher technology
- Cost of doing business
- Demanding customers
- Competition
- Hiring the right people
The growth of China as a PCB manufacturing center has eroded North America’s PCB facilities from a high of over 1,000 in 2000 to the most current (2016) count of 255. Of those, only six had revenues of over $50M USD and most were under $6M (~150). The total of $5.4B worth of shipments were distributed into seven major markets.
Anaya used his own company’s philosophy and milestones to highlight their approach to people, equipment, software, product capabilities, demanding customers and competition. He concluded with a summary of the key “Global Strategy” for success.
The second presentation was by J.R. Strickland and Jerry Magera of Motorola Solutions: “How MSI Applied Technology Beat the Microvia Hidden Threat.” This was a summary and report on their research into stacked-microvia failures that were escaping into products. This report was the main substance of the recently released IPC White Paper, IPC-WP-023 “IPC Technology Solutions White Paper on Performance-Based Printed Board OEM Acceptance—Via Chain Continuity Reflow Test: The Hidden Reliability Threat—Weak Microvia Interface.”
Starting in 2010, stacked microvias begin exhibiting field failures and steps were taken to understand why. The product failures were intermittent in nature but more often at hot temperatures. This led to their unpredictable reliability. Existing quality controls and reliability testing was not showing up these defects. Various experiments were conducted to find a fool-proof method of quality control. By 2011, an in-situ reflow test of six passes through the SMT reflow oven while instrumented with a 4-wire Kelvin resistance circuit was finalized and contained the problem. The problem was a weak microvia interface to the prior plated copper on stacked vias. Communication and consulting with industry colleges indicated they were having similar problems. All new microvia designs were to use staggered microvia chains until the root cause was thoroughly understood. A board coupon was established of the microvia chain and this proved to be effective to screen each board before assembly. IPC TM650 2.6.27A was released in September 2017 as a standard for this Pb-free reflow oven acceptance test. MSI has had zero product failures since implementation. The reflow coupon consists of six daisy chains to test each board:
- S1 chain of staggered microvias
- SX2 chain of stacked microvias
- S3 smallest finished hole size PTH via
- S4 & S5 daisy chain of constructed of via features used in the corresponding PWB
- S6 FHS of greatest number of PTH, PIH component via
They concluded with promises to share their data as they search for the root cause of this microvia problem, as stacked microvias are inevitable in future high-reliability designs. Additional work is needed by industry to identify root cause and implement corrective actions.
The third presentation, “HDI Microvia Reliability for any Temperature Extreme,” was presented by Kevin Knadle of I3 Electronics. Kevin, formerly of IBM, gave an excellent history of PTH reliability testing at IBM and the use of current induced thermal cycle (CITC) testing. Covered as IPCTM-650 2.6.26 Method B, this small, single-net coupon of 100 vias is only 1.75” x 0.3” and designed by IBM to be used many times on a panel and easily adapted to in-line process monitoring. The test uses current to heat the coupon at three degrees per second to 245°C for a dwell time of 40 seconds and repeats the cycle for 200-700 cycles per day. The temperature coefficient of resistance (TCR) is measured continuously and used to determine the coupon’s temperature. A 4-wire resistance bridge monitors the via daisy chain.
To read the full version of this article which originally appeared in the August 2018 issue of PCB007 Magazine, click here.
Suggested Items
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.
EIPC Winter Conference 2024, Day 1: A Grab-bag of Technical Topics
02/12/2024 | Pete Starkey, I-Connect007The 2024 Winter Conference of the EIPC took place January 30 and 31 at the IHK Academie in Villingen-Schwenningen, Germany. The keynote session will be reported separately. Here is my review of the first day’s conference proceedings.