Benefits of Low-Temp Soldering: I-007eBook Now Available


Reading time ( words)

Tired of solder joint failures? Get your head off the pillow! Learn about opportunities and solutions provided by low-temperature soldering in I-Connect007’s newest micro eBook: The Printed Circuit Assembler’s Guide to… Low-Temperature Soldering.

The Printed Circuit Assembler’s Guide to… is an ongoing book series specifically dedicated to educating PCB assemblers and serves as a go-to resource for essential assembly topics.

Written by Morgana Ribas and other expert authors from Alpha Assembly Solutions, this book provides an introduction to the evolution of modern low-temperature soldering, illustrates the importance of chemistry when developing low-temperature solders, and discusses advanced and emerging applications where lower melting point alloys can provide unique assembly solutions.

“Due to the recent burgeoning in the use of low-temperature solders within the electronics assembly industry, much has been written about bismuth- and tin-based solders and solder pastes. This book does a good job of distilling out the chaff and focusing on the most relevant, valuable information available,” says Raiyo Aspandiar, senior engineer at Intel Corporation.

Readers will learn the benefits low-temperature alloys have to offer, such as reducing costs, creating more reliable solder joints, and overcoming design limitations with traditional alloys.

Download your free copy today! You can also view other titles in our full library.

We hope you enjoy The Printed Circuit Assembler’s Guide to… Low-Temperature Soldering.

For more information, contact:

Barb Hockaday
I-007eBooks

+1-916-365-1727 (GMT-8)

Share

Print


Suggested Items

EIPC Summer Conference 2019, Day 2

09/12/2019 | Alun Morgan, EIPC
In this article, EIPC Chairman Alun Morgan provides the highlights of the second day of the EIPC 2019 Summer Conference, which was held in the beautiful city of Leoben in central Austria. He also talks about key points of the numerous technical presentation at the conference.

EIPC Summer Conference 2019, Day 1

09/10/2019 | Alun Morgan, EIPC
The beautiful city of Leoben in central Austria provided the setting for the EIPC 2019 Summer Conference. In this article, EIPC Chairman Alun Morgan provides the highlights of the first day of the event, including a recap of the technical presentations.

Solder Mask Curing: UV Bump Overview

08/19/2019 | Nikolaus Schubkegel
Ultraviolet (UV) bump, also called UV cure, is a processing step in which the solder mask pattern is irradiated with ultraviolet and infrared light. This step is performed with special equipment that is built as a continuous flow system, which consists of a conveyor belt and tubular UV lamps mounted above and below the belt. Read on to find out more about this process.



Copyright © 2019 I-Connect007. All rights reserved.