NASA, Partners, Advance In-Space Assembly Robotics
July 10, 2018 | NASAEstimated reading time: 1 minute
A robotic arm moving a solar array up and down along a space structure, and a robotic hand and jigging system autonomously building truss segments – sounds like a scene from a science fiction movie, but it’s just another day in the office for NASA engineers.
This week marked the last in a series of ground tests demonstrating the capabilities of the Tendon Actuated Lightweight In-Space MANipulator (TALISMAN) robotic arm; the Strut Assembly, Manufacturing, Utility & Robotic Aid (SAMURAI); and the NASA INtelligent Jigging and Assembly Robot (NINJAR) components of the Commercial Infrastructure for Robotic Assembly and Services (CIRAS) project.
Earlier this year, the team of engineers manipulated the newer, longer arm back and forth from folded to extended positions to demonstrate that it is fully operational, then they showed it could pull a truss out from being stowed in a compartment. In this demonstration, the TALISMAN arm was used to move a solar array from one truss section to another and to install the array.
SAMURAI, the robotic hand that passes truss parts, and NINJAR, the jigging robot that holds the pieces in place while they are fastened, have similarly been put to the test this year. The team first used a remote control to operate the two robots and assemble truss segments. This most recent test accomplished an autonomous truss build, using only code and no remote control.
CIRAS is a part of the In-Space Robotic Manufacturing and Assembly (IRMA) project portfolio, managed by NASA’s Technology Demonstration Missions Program and sponsored by NASA’s Space Technology Mission Directorate.
The CIRAS team includes prime contractor Northrop Grumman, supported by its subsidiary, Space Logistics, LLC; NASA’s Langley Research Center in Hampton, Virginia; NASA’s Glenn Research Center in Cleveland, Ohio; NASA’s Goddard Space Flight Center in Greenbelt, Maryland; and the U.S. Naval Research Laboratory in Washington, D.C. Phase 1 of the CIRAS project will end later this year. Northrop Grumman and Langley recently submitted a proposal for a Phase 2 contract to demonstrate these same capabilities on orbit.
Suggested Items
IMAPS & IPC to Host Onshoring Workshop
04/16/2024 | IPCThe International Microelectronics Assembly and Packaging Society (IMAPS) and IPC will host an Onshoring Workshop to discuss ongoing progress and forward-looking strategies to drive the Onshoring Advanced Packaging and Assembly, April 29 – May 1, 2024, in Arlington, Virginia.
IPC WinterCom 2024 Through the Eyes of One Dedicated Student
04/12/2024 | Sanjay Huprikar, IPCLauriane Testuz stands as a testament to the power of curiosity, perseverance, and the relentless pursuit of knowledge. Her story serves as a reminder that the path to success is often paved by an unwavering commitment to one's dreams.
2023: Year of Extremes for VDL Groep
04/08/2024 | VDL GroepThe year 2023 showed us two sides, with highs and lows. Low points were the passing of Wim van der Leegte in November, the reduction in the number of employees at VDL Nedcar and headwind in the Buses & Coaches division.
IPC, First and Only Organization in the Electronics Industry to Earn ANSI/ANAB Accreditation for Its Workforce Training
04/02/2024 | IPCIPC, the global leader in electronics education, announces a landmark achievement in professional education and training. Ten of IPC’s critical workforce training programs have been accredited by the ANSI National Accreditation Board (ANAB) under the stringent requirements of ANSI/ASTM E2659-18, Standard Practice for Certificate Programs.
Nolan’s Notes: Do More, Get More
04/02/2024 | Nolan Johnson -- Column: Nolan's NotesThis month in SMT007 Magazine, we’re investigating box build, a manufacturing sector so closely adjacent to board assembly that some OEM customers they’re the same thing. To those of us doing this work, we know they’re very different. Traditional electronic assembly work is typically concerned only with attaching the components to the circuit board. That’s our idea of a “finished good.”