U.S. Circuit Acquires Miva LED Direct Imager


Reading time ( words)

U.S. Circuit has recently added a Miva 2000L LED Direct Imager to their Escondido fabrication facility. The laser imaging of the Miva 2000L allows for more precise and consistent imaging without the defects previously allowed by photo imaging. The Miva system also provides exact positioning and improved resolution allowing for tighter, more accurate lines, spaces and alignment. Miva’s quad engine LED light head will permit almost any photoresist to be utilized, and ultimately reduces the facility environment impact on these images.

Benefits include:

  • 3 different wavelengths to expose all types of soldermask with little-to-no defects.
  • 50, 25, 12.5 micron resolutions
  • Broad spectrum, broad applications
  • Patented auto-focus technology standard
  • World class registration technology
  • Smallest footprint, lowest operating cost
  • Largest Panel Size: 24” x 24”

U.S. Circuit President Mike Fariba said, “This machine gives us all the advantages of direct imaging.  Not only will it improve our accuracy and speed but allow us to produce smaller, higher density boards. 100% of inner and outer layers are digitally imaged.  Traditional photo imaging is now an obsolete process. It also represents our continued effort to provide our customers the best technology to fulfill all of their fabrication needs.”

About U.S. Circuit

For over 33 years, U.S. Circuit has been a premier supplier of commercial PCBs and for the past several years a supplier for the military and aerospace market. U.S. Circuit has experienced continued growth in a challenging economy through consistently high performance, on-time delivery, superior quality and an emphasis on the highest level of customer service. U.S. Circuit is proud to be the circuit board manufacturer for more than 400 growing companies.

Share


Suggested Items

Increasing Productivity for Flex Fabricators

11/14/2018 | I-Connect007 Editorial Team
Barry Matties and Nolan Johnson of I-Connect007 met with Shane Noel and industry veteran Mike Jennings of ESI to discuss the introduction of their CapStone laser tool, a product aimed at doubling their flex circuit fabricators’ throughput. Mike also shares advice for fabricators who are looking to move into the ever-growing flex market.

Substrates for Advanced PCB Technologies: What Will the Future Hold?

11/06/2018 | Pete Starkey, I-Connect007
The UK chapter of the global IMAPS community of electronics and microelectronic packaging engineers shared a wealth of knowledge and wisdom about PCB substrate technology trends, developments, and future requirements in a webinar on the first of November.

PCB Design, Fabrication and Use from the Mil-Aero End-User Perspective

08/28/2018 | Pete Starkey, I-Connect007
The procedures described for Rolls Royce were directly comparable with those described for MBDA, and the presenters were unanimous in re-emphasising the importance of working closely with their chosen PCB fabricators at all levels and all stages of design, qualification and production of their circuit boards.



Copyright © 2018 I-Connect007. All rights reserved.