American Standard Circuits Installs Comac HRL-24-S Hot Roll Laminator


Reading time ( words)

American Standard Circuits recently purchased and installed a new Comac HRL-24-S Hot Roll Laminator.

“This is another example of the kind of investments we are making at American Standard Circuits in order to make sure we are not only keeping up with our customers’ needs but also staying ahead of those needs in order to be prepared for their future requirements as well,” stated CEO and president of ASC, Anaya Vardya.

The Comac HRL-24S is one of the most advanced hot roll laminators in the industry. The HRL-24S applies fine-line dry-film etch and plating resists for the fabrication of printed circuits boards and FPC flexible circuits.  State-of-the-art features of the new Comac HRL-24S include air expansion core shafts, electronic film tensioning system, micro-regulated film alignment, and dual pressure cylinders, as well as a tacky roll cleaning and wet lamination device.

Vardya added, “The Comac will be a great addition to our ever-expanding production floor.”

About American Standard Circuits

American Standard Circuits (ASC) prides itself on being a total solutions provider, manufacturing quality rigid, metal-backed, RF/microwave, flex, and rigid-flex PCBs for the medical, automotive, industrial, defense, and aerospace markets in volumes from test and prototypes to large production orders. ASC has the expertise to provide a wide variety of technologies in a time-critical environment. Their qualifications include AS9100 Rev D, ISO 9001:2015, MIL-PRF 31032, MIL-PRF-55110, MIL-PRF-50884 certification and ITAR registration. In addition to manufacturing in the USA, ASC has the ability to transition and manage your PCB requirements to lower cost regions via its qualified supply chain of offshore partners. ASC also holds many key patents for metal bonding processes. For more information about American Standard Circuits' services or to ask one of their technology experts a question click here.

Visit I-007eBooks to download your copies of American Standard Circuits’ micro eBooks today:

The Printed Circuit Board Designer’s Guide… to Fundamentals of RF/ Microwave PCBs

The Printed Circuit Designer's Guide to... Flex and Rigid-Flex Fundamentals

Share


Suggested Items

Calumet Electronics on IMPACT 2018

08/14/2018 | Patty Goldman, I-Connect007
This year at IMPACT Washington, DC, I-Connect007's Patty Goldman sat down with Steve Vairo and Mike Kadlec of Calumet Electronics, to get their overview on the event.

Catching up with LiloTree’s Dr. Kunal Shah

08/02/2018 | Dan Beaulieu
Every so often, a new product comes around that promises to be a game changer and LiloTree has one of those products. Not only is it cyanide-free, it has the potential to save 40% on your entire ENIG process and is proving to be far more stable than traditional ENIG products.

Welcome to the Silicon Valley Neighborhood: Nano Dimension Arrives in California

07/26/2018 | Dan Feinberg, Technology Editor, I-Connect007
I-Connect007 Technical Editor Dan Feinberg accepted an invitation recently to tour Nano Dimension’s new USA headquarters in Santa Clara’s Silicon Valley, which included a sit-down with President and Co-Founder Simon Fried.



Copyright © 2018 I-Connect007. All rights reserved.