Metcal’s Hand Soldering Experts to Exhibit at SMTA Dallas & Houston Expos


Reading time ( words)

Metcal today announced plans to exhibit at the SMTA Dallas and Houston Expo & Tech Forums. The SMTA Dallas Expo is scheduled to take place Tuesday, April 10, 2018 at the Plano Centre in Plano, Texas. The Houston Expo & Tech Forum will be held Thursday, April 12, 2018 at the Bayou City Event Center in Houston, Texas. The company will show its Connection Validation (CV) Soldering System with new hand-pieces, digital hot air pencil, solder wire feeder and solder tip cleaner. 

CV Soldering System

Connection Validation is Metcal’s latest patented technological innovation that is reinventing hand soldering!  Built on the company’s SmartHeat™ technology used in all Metcal soldering systems, CV evaluates the quality of the solder joint by calculating the intermetallic compound formation and providing closed-loop feedback to the operator, mitigating risk in the process. Metcal will introduce the latest CV system accessories at the show, a full set of hand-pieces including tweezers, desolder and high thermal demand that will transform the CV-5200 soldering system into a complete rework solution.  Additionally, Metcal has released the CV Monitoring Software that will improve your solder process traceability and create a performance baseline to quickly analyze your soldering performance, identify changes in your solder conditions, and allow you to make changes to your process. 

HCT2-200 Digital Hot Air Pencil

Metcal’s new Digital Hot Air Pencil was developed for very small surface mount component and package sizes (1206s and smaller) and low board densities. As component miniaturization continues (e.g. 01005 components), the ergonomics of a pencil become more important to allow a user freedom to access and rework components on the board without affecting adjacent parts. 

Solder Wire Feeder

The Solder Wire Feeder pairs with the MX series soldering and rework systems, speeding up the soldering process and increasing line efficiency by placing more control and convenience in the hands of the operator.

AC-STC Solder Tip Cleaner

Metcal’s innovative Solder Tip Cleaner features a replaceable brush system that pulls excess solder away from the tip into a removable collection tray for disposal while removing oxidation from the tip. Solder tips represent a significant portion of the cost of ownership for a solder station, and Metcal’s new Solder Tip Cleaner removes oxidation and extends the life of the solder tip. By placing the tip into the opening, the AC-STC Solder Tip Cleaner senses the tip and automatically activates, saving the 

About Metcal

Metcal is a benchtop solutions expert that has delivered broad value to customers since its Silicon Valley beginnings in 1982. Offering unrivalled performance, risk mitigation, and ROI, we give electronics manufacturers in automotive, aerospace, medical devices and military sectors the tools—and the confidence—they need to develop faster, safer, more advanced products. Metcal provides advanced technology products across hand soldering, convection rework, fume extraction, and fluid dispensing applications. For more information, click here.

Share


Suggested Items

What SMT Component Shortages Mean for Design and Manufacturing Engineers

09/13/2018 | Russell Poppe, JJS Manufacturing
Much has been written about the increasing shortages of electronic components such as MLCCs, chip resistors and other semiconductor devices. And the manufacturing industry is now seeing price increases and greatly extended lead times. It seems the situation is likely to get rapidly worse rather than better. What can we do? Read on.

RTW NEPCON South China: Mycronic Discusses Industry 4.0

09/12/2018 | Real Time With... NEPCON South China
At the recent NEPCON South China 2018 event in Shenzhen, Clemens Jargon, VP for Global Dispensing and Asia at Mycronic, discusses I-Connect007's Edy Yu the challenges that customers face on their journey towards Industry 4.0, and how Mycronic is addressing these issues. From jet printing to solder paste inspection, to pick-and-place, Jargon talks about their total solutions that aim to help customers take their production to the next level.

Whitepaper: Electronics Cleanliness Testing

09/11/2018 | Jason Fullerton, Alpha Assembly Solutions
This paper investigates and compares the performance of no-clean liquid wave soldering fluxes using a commercially available localized extraction and cleanliness testing system, and surface insulation resistance (SIR) testing. Find out which test is suitable for your processes.



Copyright © 2018 I-Connect007. All rights reserved.