Arlon EMD Achieves IPC’s Qualified Product Listing Certification


Reading time ( words)

Arlon Electronic Materials, a specialty materials supplier based in Southern California, received IPC-4101 Qualified Products Listing Certification for all polyimide specification sheets. 

Arlon is the only US laminator to have achieved IPC’s QPL certification for all three slash sheets and is listed as an IPC-4101 trusted source capable of manufacturing in accordance with industry best practices for polyimide-based specification sheets 40, 41 and 42. 

John Wright, Quality Manager at Arlon, stated, “As a supplier of materials that are the foundation of mission critical electronics for the military and aerospace industries, Arlon has embraced the concept of the IPC Validation Service and the creation of a Qualified Products List.   IPC’s validation of the integrity and conformance of our polyimide products to each of the three IPC-4101E slash sheets assures designers and fabricators that Arlon’s materials will consistently meet or exceed their requirements.”

Arlon EMD can be found on IPC's QML/QPL (Qualified Product Listing) database.

About Arlon

Arlon EMD is a privately held, veteran owned, US manufacturer and distributor of specialty materials. Arlon has supplied materials for the N. American, UK and European markets for more than 25 years from their manufacturing location in Rancho Cucamonga, California.

For additional information, please click here.

Share


Suggested Items

PCB Manufacturing (R)evolution in the Making

04/11/2018 | Stephen Las Marias, I-Connect007
At the recent HKPCA and IPC Show 2017 in Shenzhen, China, I was able to interview Les Sainsbury, CEO, and Andrew Kelley, CTO, of XACT PCB, as well as Alex Stepinski, vice president of Whelen Engineering’s PCB Fab Business Unit, to discuss process evolution and technology developments in the PCB manufacturing industry.

New Year, New Equipment—Right?

02/26/2018 | Patty Goldman, I-Connect007
This month, we will discuss the equipment purchasing decision-making process. How many of you can recall the earliest “dippy dunk” PCB shops, so-called because that’s exactly how it was done? There were no conveyorized lines, no automatic hoists, no load/unload stations, maybe not even a lab for analyzing the plating baths.

EIPC’s Winter Conference in Lyon, France: Day 2 Review

02/20/2018 | Pete Starkey, I-Connect007
The first day of the conference had started and ended in the dark—a long and technically intense day! After a convivial conference dinner and a good night’s sleep we were back on the bus, this time in daylight at the slightly later time of 8:00 a.m., for the journey from downtown Lyon back to Alstom’s conference facility in Villeurbanne, and it wasn’t raining. In fact, there was even some sunshine later in the day!



Copyright © 2018 I-Connect007. All rights reserved.