Matrix to Exhibit at IPC APEX EXPO 2018
February 23, 2018 | Matrix USA Inc.Estimated reading time: 1 minute
Matrix to exhibit at IPC APEX EXPO 2018, to be held on February 27 through March 1 in San Diego, California.
Matrix USA will be exhibiting its full line of advanced materials to support the North American printed circuit board market. Key products include:
Panasonic Megtron Series – The global industry standard for High Speed, Low Loss Multi-layer circuit board materials suitable for large capacity and high-speed transmission of high frequency signal for high-end ICT infrastructure equipment, automotive industry and other applications.
Panasonic Felios – Advanced adhesiveless copper clad flex materials designed to meet the demanding high performance and reliability requirements for avionic, commercial, industrial and consumer markets. Featuring Felios R-F705T and R-BM17 low loss LCP flexible laminates and bond adhesives.
Hakuto Cut Sheet Laminators and Automated Cleaning and Handling Equipment
Matrix and Panasonic personnel will be available at Booth 539 to discuss the features, benefits, and advantages of these circuit board materials and value-added services.
About Matrix USA Inc.
Committed to the motto: “Quality Products, Dependable People”, Matrix was established in 1977 with the objective of providing quality raw material to the North American Printed Circuit Board Industry. Matrix has four rapid response warehouses located throughout the US and Canada that fulfill high quality, fast delivery, and custom orders daily. For further information click here.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: