IPC Releases IPC/PERM-2901, Pb-free Design and Assembly Implementation Guide


Reading time ( words)

IPC—Association Connecting Electronics Industries' Pb-free Electronics Risk Management (PERM) Council has developed the first single document dedicated solely to assisting design engineering in the development of electronics that are completely lead-free (Pb-free) and meet the demanding requirements of aerospace, defense and high performance (ADHP) products and systems.

IPC/PERM-2901, Pb-free Design and Implementation Guide, provides an in-depth review of printed board defects, manufacturing and soldering processes, supply chain control, selection, use and assembly with commercial off-the-shelf (COTS) products and obsolescence management.

While the commercial electronics industry has almost eliminated the need for tin-lead (SnPb) based electronics systems and products, the ADHP industry, due to a lack of industry-accepted reliability models for Pb-free interconnections, has continued to rely on SnPb for their products. As it becomes more cost-prohibitive for the ADHP industry to continue to use SnPb products, and with failure mechanisms for Pb-free materials being significantly different than SnPb materials, gaining knowledge and understanding of how Pb-free materials affect the ADHP industry has become critical.

Although many technical papers and industry studies have been published addressing the Pb-free soldering process over the past 20 years, the IPC/PERM-2901, Pb-free Design and Implementation Guide is the first to assist design engineering, quality assurance and manufacturing engineering in understanding and appreciating the differences in mechanical and physical behaviors of Pb-free soldering and providing avenues for risk mitigation.

This guideline specifically addresses the “delta” differences between SnPb and Pb-free solder technologies relative to manufacturing the same products. The differences in these solder technologies are generally categorized (with respect to Pb-free solder alloys) as:

  • Typically poorer wetting ability
  • Differences in appearance and inspection criteria
  • Typically higher melting temperature
  • Potential tighter process window for repair/rework
  • Increased potential of tin whiskers

The PERM Council, comprised of global participants from government, military, medical, academia and other not-for-profit organizations, along with private companies, was created to address the need for how Pb-free materials directly affect product performance, reliability and service life.

The European Union’s Restriction of Hazardous Substances (RoHS) profoundly affected the electronics industry when lead was listed as a restricted substance. According to Linda L. Woody, formerly of Lockheed Martin and former PERM Council Chair, “ADHP systems and products have a broad range of performance requirements, and have relied on SnPb products for decades. We created the guideline to ease the transition from SnPb to Pb-free, and to help the industry meet the demanding requirements of the ADHP systems and products.”

About IPC

IPC is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 4,300-member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Washington, D.C.; Atlanta, GA.; Brussels, Belgium; Stockholm, Sweden; Moscow, Russia; Bangalore and New Delhi, India; Bangkok, Thailand; and Qingdao, Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China. For more information, click here.

Share


Suggested Items

Greatest Challenges in Soldering

12/12/2018 | Stephen Las Marias, I-Connect007
In a recent SMT007 survey, we asked the following question: "What are your greatest challenges when it comes to soldering?" Here are just a few of the replies, slightly edited for clarity.

Dr. Traian Cucu Discusses Low-Temperature and Lead-Free Soldering

12/14/2018 | Happy Holden, I-Connect007
Dr. Traian Cucu, group leader of the Global Applications and Technologies Expert Group (GATE)—R&D—within Alpha Assembly Solutions, speaks with I-Connect007 Technical Editor Happy Holden about low-temperature and lead-free soldering applications, and the many critical advantages that can achieved by moving to a low-temperature process. They talk about the industry's transition to lead-free, the first, second and third generation of adoption of low-temperature alloys.

Greg Vance on SMTA Ohio Chapter Updates

12/05/2018 | I-Connect007 Editorial Team
This summer, Patty Goldman interviewed Greg Vance, senior project engineer at Rockwell Automation and president of the Ohio chapter, at the SMTA Ohio Valley Expo and Tech Forum in Independence, Ohio. Vance discusses the show, young professionals in the industry, and other events, such as solder paste roundtables.



Copyright © 2018 I-Connect007. All rights reserved.