Best Technical Paper at IPC APEX EXPO 2018 Selected
February 12, 2018 | IPCEstimated reading time: 1 minute
The best technical conference paper of IPC APEX EXPO 2018 has been selected. Voted on through a ballot process by members of the IPC APEX EXPO Technical Program Committee, the paper authors will receive their awards during the opening keynote session on Tuesday, February 27.
Taking top honors, the winning paper is, “Equivalent Capacitance Approach to Obtain Effective Roughness Dielectric Parameters for Copper Foils” by Marina Y. Koledintseva, Oracle. Her co-author was: Tracey Vincent, CST of America. This paper will be presented during Technical Conference Session 16 (PCB Signal Integrity/High Speed/High Frequency) on Wednesday, February 28.
This year, two papers were selected in the honorable mention category. Honorable mention went to, “Derivation of Equation on Thermal Life Prediction of Plated Through-Hole for Printed Wiring Board” by Yoshiyuki Hiroshima, Fujitsu Advanced Technologies Limited. His co-authors were: Shunichi Kikuchi and Akiko Matsui, Fujitsu Advanced Technologies Limited; Yoshiharu Kariya and Kazuki Watanabe, Shibaura Institute of Technology; Hiroshi Shimizu, Hitachi Chemical Company, Ltd.; and Jack Tan, HDP User Group International, Inc. This paper will be presented during Technical Conference Session 12 (PCB Reliability) on Wednesday, February 28.
Honorable mention also goes to “Bottom Heating during Manual Rework” by Lars Bruno, Ericsson AB. This paper will be presented during Technical Conference Session 20 (Rework) on Wednesday, February 28.
The papers were evaluated on their technical content, originality, test procedures and data used to deduce conclusions, quality of illustrations and the clarity and professionalism of writing as well as value to the industry.
To register for the IPC APEX EXPO technical conference or for more information on all the activities taking place including standards development committee meetings, professional development courses, the exhibition and more, click here.
About IPC
IPC is a global industry association based in Bannockburn, Ill., dedicated to the competitive excellence and financial success of its 4,300 member companies which represent all facets of the electronics industry, including design, printed board manufacturing, electronics assembly and test. As a member-driven organization and leading source for industry standards, training, market research and public policy advocacy, IPC supports programs to meet the needs of an estimated $2 trillion global electronics industry. IPC maintains additional offices in Taos, N.M.; Washington, D.C.; Atlanta, Ga.; Brussels, Belgium; Stockholm, Sweden; Moscow, Russia; Bangalore and New Delhi, India; Bangkok, Thailand; and Qingdao, Shanghai, Shenzhen, Chengdu, Suzhou and Beijing, China.
Suggested Items
Book Excerpt: The Printed Circuit Assembler’s Guide to... Factory Analytics
04/24/2024 | I-Connect007 Editorial TeamIn our fast-changing, deeply competitive, and margin-tight industry, factory analytics can be the key to unlocking untapped improvements to guarantee a thriving business. On top of that, electronics manufacturers are facing a tremendous burden to do more with less. If you don't already have a copy of this book, what follows is an excerpt from the introduction chapter of 'The Printed Circuit Assembler’s Guide to... Factory Analytics: Unlocking Efficiency Through Data Insights' to whet your appetite.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Winner of The Science Show Rakett 69 Receives Incap Scholarship
04/24/2024 | IncapThe winner of the Rakett 69 science show, Andri Türkson, who stood out as an electronics enthusiast, received a scholarship from Incap Estonia, along with an internship opportunity in Saaremaa.
Alternative Manufacturing Inc. Awarded QML Requalification to IPC J-STD-001 and IPC-A-610
04/24/2024 | IPCIPC's Validation Services Program has awarded an IPC J-STD-001 and IPC-A-610 Qualified Manufacturers Listing (QML) requalification to Alternative Manufacturing Inc (AMI).