AIM to Exhibit at IPC APEX EXPO 2018 in San Diego


Reading time ( words)

AIM Solder is pleased to announce their upcoming attendance at IPC APEX EXPO 2018 taking place February 27 – March 1, 2018 at the San Diego Convention Center in San Diego, California. AIM will highlight their revolutionary REL61 and REL22 lead-free solder alloys, along with their full line of solder assembly materials.

AIM REL61 was developed to provide PCB assemblers and designers with an enhanced reliability, cost-effective replacement for SAC305 and other low/no silver alloys. REL61 outperforms all lead-free alloys in durability, wetting performance, thermal cycling performance, and BTC void performance. Available in paste, wire and bar solder formats, REL61 can be incorporated into all phases of PCB assembly. For the most extreme operating environments be sure to learn about REL22. AIM’s innovative REL alloys are engineered for reliability, usability, and cost effectiveness.

Along with their REL products, AIM will showcase its full line of advanced solder materials, including its solder pastes, liquid fluxes, tin/lead and lead-free alloys. Visit AIM at IPC APEX EXPO 2018 at booth #1211 at the San Diego Convention Center, San Diego, California for more information and to speak with one of AIM’s knowledgeable staff members.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training. For more information about AIM, click here.

Share


Suggested Items

Configure to Order: Different by Design

01/09/2018 | Michael Ford, Aegis Software Corp.
When considering implementation of Industry 4.0 solutions, following the hype in the market, attention typically is focused on the need for communication between machines on the shop-floor. Knowing what is currently executing and the status of each process in the factory, as well as all the related resources and support operations, provides critical information for Industry 4.0 computerized management systems.

Step Stencil Technologies and Their Effect on the SMT Printing Process

12/21/2017 | Greg Smith and Bill Kunkle, BlueRing Stencils, and Tony Lentz, FCT Assembly
Components such as quad flat no lead (QFNs), land grid array (LGAs), micro ball grid array (micro BGAs), 0201s and even 01005s continue to push manufacturers to use thinner stencil foils to apply the correct volume of paste onto their boards, but larger components such as edge connectors still require larger paste volumes.

What Matters Most is Communication

12/04/2017 | Stephen Las Marias, I-Connect007
While there may be new techniques and strategies, technologies, equipment, tools, and materials to employ and utilize, there is always one thing that will ensure the manufacturing/ assembly success of your product: communication. Communication between the designer and the assembler will help improve the manufacturability and assembly of the final product—even before the board design gets fabricated.



Copyright © 2018 I-Connect007. All rights reserved.