Vision Engineering Webinar on Eliminating PCB Problems and Failure Modes
January 17, 2018 | Vision Engineering Inc.Estimated reading time: 1 minute
Vision Engineering has teamed up with industry-expert Bob Willis to broadcast a free Electronics Academy Webinar aimed at identifying the issues affecting PCB/SMT assembly and the challenges of achieving Zero Defect Manufacture.
The next webinar, Eliminate Printed Circuit Board Problems & Failure Modes will take place on January 23rd at 2:30 EST.
This webinar will demonstrate test methods to try and tricks of the trade to understand how PCBs can fail and how to eliminate many of the common causes.
The topics covered in this webinar include:
- Through-hole plating failures
- CAF contamination shorts
- PCB Delamination
- Nickel/Gold - Black pad & Black Tar
- Innerlayer separation
- Solder mask cracking
- Outgassing
- Need for product specifications
- Auditing a PCB supplier
For more information or to register for this webinar, click here.
Previous webinars in this series are available on-line and can be viewed at the following links:
Solder Joint Inspection & Process Defects
Counterfeit Component Inspection & Detection
Bob Willis is a globally-recognized expert in surface mount and area array technology, providing training and consultancy to electronics manufacturers worldwide for over 30 years. Bob regularly speaks at international events, providing expert knowledge to improve skills and knowledge for electronics production staff and engineers.
About Vision Engineering Inc.
Vision Engineering Inc. designs and manufactures a patented range of ‘eyepiece-less’ microscopes for industrial and laboratory applications. Established in 1958, more than 300,000 systems have been installed worldwide for inspection and measurement tasks. Company headquarters are based in Woking, UK with manufacturing facilities in the US and UK. Regional offices are located throughout North America, Europe and Asia.
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.