Ventec Highlights Advanced Ultra-Low Dk PCB Materials at DesignCon 2018
January 8, 2018 | Ventec InternationalEstimated reading time: 1 minute
Ventec International will showcase its extensive range of tec-speed materials for high-speed low-loss applications including the latest tec-speed 10 ultra-low dk material at DesignCon 2018 show in Santa Clara, California, USA from 30 January to 1 February in booth #118. A further highlight will be a next generation best-in-class, thermally conductive (8 X FR-4) high Tg thin-core and prepreg material (VT-5A2) ideal for hybrid multilayer low-loss constructions.
Ventec will be exhibiting at DesignCon 2018, the premier conference for chip, board, and systems design engineers, on booth #118 highlighting it’s tec-speed range of PCB materials for high-speed low-loss applications. By using an ultra-low Dk material with Dk values between 2.3 and 2.8 lower losses, lower system power requirements and with it the delicate balance of performance and cost can be achieved. Higher layer counts on backplanes, daughter cards and hand-held's are made possible in a smaller footprint by having smaller layer to layer separation without sacrificing trace width.
“Maintaining wider traces produces lower resistance in the signal path," said Martin Cotton, Director of OEM Technology Marketing. "Combining ultra-low Dk with a low Df of 0.003 to 0.004, produces an alternative to ever smaller traces and higher power requirements."
Ventec’s highest performance thermally conductive laminate material so far will also make its DesignCon debut. VT-5A2 offers a polymer matrix that is fully compatible with Ventec laminates, epoxy or polyimide based materials including tec-speed, making it the ideal choice for the manufacture of hybrid multilayer low-loss constructions.
Cotton and Peter Koolen, Global Account Manager for OEM Technology Marketing, will be on hand to offer technical advice.
About Ventec International
With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry. For more information, click here.
Suggested Items
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources: