LaserVia Sells Intellectual Property Portfolio


Reading time ( words)

LaserVia Corporation has announced that it is putting its intellectual property portfolio up for sale.

The timing on this announcement fits well with the recent renewed interest and energy for the advancement of high density interconnects (HDI) which has increased the demand for improved laser drilled blind microvias; including z-axis interconnect using blind microvias. Potentially valuable interconnect advances include via-in-pad slots and other shapes instead of round holes allowing significant reductions in the footprint for surface mounted component pads.

laser1.jpg

Advances in laser drilling is further possible with a proposed laser drilling machine design that can drill both sides of a circuit board using an inline system for improved processing speeds resulting in lower cost:

laser2.jpg 

The IP for sale includes the valuable US Patents 6,631,558 & 7,062,485.

For additional information please contact Dan Feinberg at Fein-Line Associates (949) 498-7866 baer@feinline.com or Larry Burgess at Laservia (503) 446-7248 lwburgess@laservia.com.

Share


Suggested Items

EIPC 50th Anniversary Conference Day 2: The Past, the Present and the Future, Pt. 2

07/10/2018 | Pete Starkey, I-Connect007
Alun Morgan wrapped-up the proceedings, thanking delegates for their attention, speakers for sharing their knowledge and sponsors for their generous support. Special thanks and good wishes to Michael Weinhold for his enormous contribution over the years, and to Kirsten Smit-Westenberg and Carol Pelzers for their calm and professional organisation and management of another superb event.

EIPC 50th Anniversary Conference Day 1: The Past, the Present and the Future, Pt. 1

07/13/2018 | Pete Starkey, I-Connect007
Just like old times—meeting with John Ling, with whom I had previously travelled to industry events for over two decades, and who still carries the role of EIPC marketing manager, to fly together from Birmingham UK to Dusseldorf in Germany for the EIPC 50th Anniversary Summer Conference.

ACE’s AccuWrap Simplifies Multiple Sequential Laminations with Blind Vias

05/29/2018 | Andy Shaughnessy
At DesignCon 2018, I spoke with James Hofer, general manager for Accurate Circuit Engineering, a quick-turn fabricator based in Santa Ana, California. James gave me a preview of AccuWrap, a new type of processing technology that lets designers reduce the amount of copper during sequential laminations while still meeting IPC specs, which should be of great interest to RF designers.



Copyright © 2018 I-Connect007. All rights reserved.