Panasonic and Matrix Complete Outgassing Tests for Flex Materials


Reading time ( words)

Panasonic Flex materials and Matrix Flex Coverlay materials have passed the ASTM E595-15 outgassing test. The part numbers included in this certification include:

Panasonic_Matrix.jpg

Bob Berg, Matrix VP of sales, said, “Many of our customers make flex circuits that go into space applications, and a key test to qualify materials in space is the ASTM E595-15 outgassing test. This is a very stringent requirement and passing this test ensures that Panasonic Flex and Matrix Plus coverlay materials qualify for applications used in the deep vacuum of space.”

About Matrix USA Inc.

Committed to the motto, “Quality Products, Dependable People,” Matrix was established in 1977 with the objective of providing quality raw materials to the North American Printed Circuit Board Industry. Matrix has four rapid-response warehouses located throughout the US and Canada that fulfill high quality, fast delivery, and custom orders daily. For further information, click here.

About Panasonic

Panasonic Corporation is a worldwide leader in the development and engineering of electronic technologies and solutions for customers in residential, non-residential, mobility and personal applications. Since its founding in 1918, the company has expanded globally and now operates over 500 consolidated companies worldwide, recording consolidated net sales of 7.74 trillion yen for the year ended March 31, 2014. Committed to pursuing new value through innovation across divisional lines, the company strives to create a better life and a better world for its customers. For more information, click here.

Share


Suggested Items

PCB Design, Fabrication and Use from the Mil-Aero End-User Perspective

08/28/2018 | Pete Starkey, I-Connect007
The procedures described for Rolls Royce were directly comparable with those described for MBDA, and the presenters were unanimous in re-emphasising the importance of working closely with their chosen PCB fabricators at all levels and all stages of design, qualification and production of their circuit boards.

Thermal Capabilities of Solder Masks: How High Can We Go?

08/24/2018 | Sven Kramer, Lackwerke Peters
This article focuses on three different coating material groups that were formulated to operate under high thermal stress and are applied at the printed circuit board manufacturing level. While used for principally different applications, these coatings have in common that they can be key to a successful thermal management concept especially in e-mobility and lighting applications.

Study on Application of Four-Wire and Four-Terminal Flying Probe Test Scheme

08/10/2018 | Jin Erbing, Joint Stars Technology Co., Ltd
With the four-wire and four-terminal flying probe test method, voids in the holes formed in the PCB due to process differences, thin copper, and poor conduction due to residual adhesive after laser drilling of the HDI board can be detected, and the circuit board guide can be solved. With the development of multilayer, high-density PCB layout, four-wire four-terminal flying probe testing will play an increasingly important role.



Copyright © 2018 I-Connect007. All rights reserved.