Libra Industries Enhances Inspection Capabilities with Viscom X-ray System

Reading time ( words)

Libra Industries has purchased and installed Viscom's new X8011-II PCB X-ray inspection system at its Dallas, Texas facility. The Viscom X8011-II enables Libra Industries to offer its customers 3D modeling of the solder connections on devices ranging from BGAs, QFNs, thru-hole technology and any lead-less devices.  


“The new Viscom X8011-II PCB X-ray automates the inspection process, reducing human misinterpretation and provides shorter cycle inspections and improvised process controls,” stated Cory McMaster, Libra Industries’ Assembly Manager. “This equipment also gives us the capability to provide a non-destructive failure analysis of solder joints on PCBs.”

In modern SMD production, components such as BGAs, QFNs or QFPs are gaining ground. Because their connectors are mostly hidden, many solder joints can only be reliably checked with an X-ray inspection. The X8011-II PCB high resolution X-ray inspection system was developed especially for these tasks. Typical applications are, for example, the inspection of electronic assemblies and components, quality assurance in power electronics, or non-destructive special inspections.

Libra Industries continues to invest to provide customized manufacturing solutions to help make its customers more competitive and improve their profitability.

About Libra Industries

Libra Industries is a leading provider of integrated Electronic Manufacturing Services (EMS), serving OEMs with complex or technologically sophisticated manufacturing requirements in a broad range of industries including industrial automation, medical, military and aerospace, instrumentation and LED lighting. Four world-class manufacturing facilities allow Libra Industries to provide customers with manufacturing flexibility including complete system build, module and subassembly production, as well as simple to complex PC board assembly. With an ongoing commitment to investment in people, quality systems, and the latest manufacturing equipment and processes, Libra Industries is committed to managing their clients’ products from initial design and prototype to full production; assisting their clients in their efforts to improve time to market, reduce total systems cost, and increase quality. For more information click here.


Suggested Items

5 Techniques Used to Detect Counterfeit Electronic Components

03/16/2018 | Danielle Olivier, JJS Manufacturing
Although government pressure and private resources have helped minimize the risk of counterfeit components from entering the supply chain, there is still and will most likely continue to be, a prominent threat. So, what can you do to minimize this risk? Read on.

Manufacturability: Pad Relief and Mask Relationship to Solder Joint Volume

03/09/2018 | Ken Horky, Peterson Manufacturing
Electronic assembly thermal management has always been an issue but has become more significant as we pack more power and function into a smaller form factor. In recent years, the growing use of LEDs for illumination on a large scale has presented additional thermal demands.

Your Competitors are Outsourcing Their Manufacturing; Shouldn’t You?

03/08/2018 | Neil Sharp, JJS Manufacturing
As an OEM, you will be focused on increasing sales and maximizing profits. But you can only sell what you can produce, and manufacturing complex industrial electronic products day in, day out can be a headache. As your sales start to climb, you move closer to hitting your internal capacity limits. Here's how EMS providers can help you become successful in your manufacturing.

Copyright © 2018 I-Connect007. All rights reserved.