Universal Synaptics Renews Exclusive Distribution Contract with Derco

Reading time ( words)

Derco, a Lockheed Martin Company, has signed a contract renewal with Universal Synaptics for the Intermittent Fault Detection & Isolation System (IFDIS) and the portable Voyager Intermittent Fault Detector (VIFD).

This extends a successful partnership that began in 2010 and allows Derco to continue providing specialized avionic repair services to customers worldwide.

The IFDIS is used to detect intermittent and other signal path errors or “ghost faults” in nearly any piece of electronic equipment or wiring on any platform including C-130, F-16, and UH-60. Identifying faults and eliminating failures during testing saves operators time and maintenance costs. At the heart of the IFDIS™ is patented intermittent fault detection circuitry that continuously monitors each electrical path in the unit chassis. During testing the IFDIS detects, logs and isolates any intermittent event that occurs, and then graphically displays the failing circuits to the operator to facilitate quick and efficient repairs.

This benefit was demonstrated by the Department of Defense, who voted the IFDIS the Great Ideas Competition Winner in 2010 and 2012. In June 2017, NAVAIR News featured an article about the savings the Fleet Readiness Center Southwest experienced after implementing the IFDIS to troubleshoot F/A-18 Generator Converter Units (GCU). A problematic GCU had passed a visual inspection test, test program inspection check, and Aircraft Engine Components Test Stand, before the IFDIS revealed an intermittent pushed pin issue with the GCU wiring harness.

“The IFDIS product has transformed how operators address intermittent faults,” said Kaan Tuncel, director of strategic partnerships for Derco. “We are proud to continue our partnership with Universal Synaptics as the exclusive distributor. It allows us to provide customers with reliable and economic testing while saving them from prematurely purchasing a new unit.”

Derco also utilizes the IFDIS product in its FAA Part 145 certified repair shop to improve the overall reliability of high failure rate avionics.

“We chose to continue partnering with Derco because they recognize the importance of supporting operators’ maintenance and mission goals through quality parts and sophisticated testing,” said Ken Anderson, Universal Synaptics vice president. “Derco recognized the potential of our technology early on and has continued providing the avionics cost-savings and reliability throughout the industry.”

About Universal Synaptics Corporation

Universal Synaptics Corporation was founded in 1996 by Brent Sorensen, a test engineer and inventor with more than 30 years’ experience is a pioneer of aging electronics science.  Mr. Sorensen spent years researching and solving the long standing aging / intermittent / No Fault Found (NFF) phenomenon. His focused research into the primary root cause of these problems led to the development, patent, production, and deployment of the Intermittent Fault Detection (IFD) neural network wiring / circuit analyzers that remain the pillar in the company. Universal Synaptics Corporation is the industry leader in detecting and isolating elusive intermittent faults with a line of Intermittent Fault Detector (IFD) investigation tools. 

About Derco

Founded in 1979, Derco, A Lockheed Martin Company based in Milwaukee, Wisconsin, is a recognized leader in providing aircraft spares distribution, logistics, component repair, and technical solutions to customers around the globe. Through solid relationships with premier original equipment manufacturers (OEMs), Derco maintains one of the largest and most diversified aircraft spares inventories in the world. Today, Derco is an integrator and full service logistics solutions provider supporting military and commercial fleets in 65 countries. 

About Lockheed Martin

Headquartered in Bethesda, Maryland, Lockheed Martin is a global security and aerospace company that employs approximately 97,000 people worldwide and is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.


Suggested Items

What’s Coming in 3D Printing Technology in 2018

12/27/2017 | Cullen Hilkene, 3Diligent
First, the arrival of extrusion metal printing. Today's extrusion printers are the most prevalent and, arguably, user-friendly 3D Printers in the market. Now, after years of there being zero metal extrusion printers, there will be two in the new year from Desktop Metal and Markforged. These technologies promise new materials and a higher degree of user friendliness for metal printing.

DARPA, Santa Continue HO HO HO-liday Team-Up

12/26/2017 | DARPA
DARPA’s High-speed Optimized Handling of Holiday Operations (HO HO HO) initiative is celebrating its fourth anniversary this year, and the Agency is proud to continue its tradition of sharing breakthrough technologies to help Santa Claus and his elves more quickly and efficiently complete their holiday duties.

International Partners Provide Science Satellites for America’s Space Launch System Maiden Flight

05/30/2016 | NASA
NASA’s new Space Launch System (SLS) will launch America into a new era of exploration to destinations beyond Earth’s orbit. On its first flight, NASA will demonstrate the rocket’s heavy-lift capability and send an uncrewed Orion spacecraft into deep space.

Copyright © 2018 I-Connect007. All rights reserved.