Ventec International Materials Certified to Latest IPC-4101 Revision E


Reading time ( words)

Further to the latest release of the IPC-4101 revision E, Ventec International Group announces that as of 1st July 2017, all related products are certified and released to the IPC-4101E standard.

Following an internal review process, Ventec materials meet all the requirements of the new IPC-4101 Revision E standard (Specification for Base Materials for Rigid and Multilayer Printed Boards). Back in 2014, Ventec International Group declared its support for the proposal led by ESA, the European Space Agency, to define supplemental requirements to the IPC4101D specification for base materials for rigid and multilayer PCBs. The latest revision E of the specification replaces IPC-4101D-WAM1 and formally includes an Appendix A that provides supplemental inspection requirements for base materials used in high-reliability PCBs for critical applications, with particular reference to the prevention and detection of foreign material inclusions (FOD) early in the supply chain.

Ventec has been inspecting, testing, and releasing materials to the standard for many years. The company continues its commitment to ongoing strategic investments in clean-room equipment and facilities that demonstrate Ventec’s principles of continuous improvement to consistently achieve the highest delivered quality to all its customers including military & aerospace and automotive customers. The latest investments will add AOI onto all treaters in Suzhou, China starting with highest reliability materials for high reliability applications (VT-901 and VT-90H polyimide as well as the full range of No Flow / Low Flow prepregs for rigid flex applications). 

Mark Goodwin, COO Europe & USA commented: "Our approach to manufacturing and supplying laminates & prepregs covers the entire supply chain. We follow rigorous procurement, manufacturing and auditing processes at all our manufacturing sites and global service centers to ensure our materials and our services are consistently of the highest quality. This includes ensuring that our materials always comply with the prevailing standards."

About Ventec International

With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry. For more information, click here.

Share


Suggested Items

HDI: Born in the USA and Making a Comeback

11/22/2017 | Patty Goldman, I-Connect007
There is no denying that high-density interconnect (HDI) has been around a long time—over 25 years, believe it or not. From almost the moment of its conception in the U.S., the technology was adopted by and used almost exclusively in Asia.

3D Printed Electronics for Printed Circuit Structures

10/04/2017 | Samuel LeBlanc, Paul Deffenbaugh, Jacob Denkins, and Kenneth Church nSCRYPT INC.
Printed electronics is a familiar term that is taking on more meaning as the technology matures. Flexible electronics is sometimes referred to as a subset of this and the printing approach is one of the enabling factors for roll-to-roll processes.

The State-of-the-Art in PCB Pre-production Engineering

09/21/2017 | Pete Starkey, I-Connect007
If there’s one benefit of old age, it’s being able to remember the introduction to our industry of technologies that may be taken for granted by the present generation, but were revolutionary at the time. I can recall the history of Ucamco as far back as the late 1980s when, as one of the very early adopters of the DISC laser plotter and its associated electronic PCB front-end tooling system, our company gained entry to a spectacular new world of pre-production engineering capability.



Copyright © 2017 I-Connect007. All rights reserved.