Electronics Industry Pioneer Jim Raby Passes Away


Reading time ( words)

Long-time IPC member, industry leader and founder of STI Electronics Inc., Jim Raby, 82, passed away on Friday, June 16.  

For more than 40 years, Jim worked on industry standards, including IPC-J-STD-001, IPC-A-610 and standards for wire harnesses. He was also involved in research for lead-free solder processes and materials. His seminal paper, “Standardization of Military Specifications,” was the roadmap for reducing some 219 specifications into a single four-document set known as MIL-STD-2000, the precursor to J-STD-001 and IPC-A-610.

He worked on more than a dozen standards and training programs, and chaired or vice-chaired committees on soldering, rework and repair, component mounting, and product assurance. He wrote the curriculum and conducted beta testing for IPC training programs for IPC-J-STD-001, IPC-A-610D, IPC/WHMA-A-620, and IPC-7711/7721A, and received the IPC Presidents Award in 1984.

Jim will be missed by his fellow IPC committee members, staff and his colleagues in the electronics manufacturing industry.

In a statement, the company said, "… Although Jim's passing will leave a huge void in each of our lives, his legacy will live on. His love for family, friends, colleagues and country will remain in our hearts and memories for years to come."

Funeral arrangements are pending.

Share


Suggested Items

Solder Printing Process Inputs Impacting Distribution of Paste Volume

12/14/2017 | Marco Lajoie and Alain Breton, C-MAC Microelectronics
The volume of solder deposition, like any process, has variations that may be characterized by a statistical distribution curve, whether normal or non-normal. As complexity, density, cost and reliability requirements increase, there may be value in narrowing the distribution curve. It is common sense that less variation serves the interest of quality of the more complex and dense circuit boards.

Improving Solder Paste Printing

12/12/2017 | Stephen Las Marias, I-Connect007
Of the three elements involved in the solder paste printing process—stencil, solder paste, and printer—the stencil is considered one of the major factors affecting the transfer efficiency, accuracy, and consistency, of solder pastes into the pads, especially with the continuing trend towards miniaturization.

Equipment Matters in Solder Paste Printing

12/06/2017 | Stephen Las Marias, I-Connect007
The solder paste printing process has always been considered a major contributor to yield loss. According to many studies, solder paste printing accounts for up to 70% of all PCB assembly defects. For the December issue of SMT Magazine, we interviewed experts in the solder paste printing process to learn more about the key issues leading to this huge percentage of defects, and the technology developments that are addressing these challenges and improving yields in the process.



Copyright © 2017 I-Connect007. All rights reserved.