IPC Hand Soldering Competition Winner Crowned at SMT Hybrid Packaging 2017


Reading time ( words)

The competition was fierce as 34 competitors participated in the IPC’s Hand Soldering Competition at SMT Hybrid Packaging 2017 in Nuremberg, Germany. Taking first place and a cash prize of €300 was Elaine Chesnais, Thales International, who earned 433 points out of a possible 437. Chesnais was the second-place winner at SMT in 2016.

Second place and a cash prize of €200 this year went to Aurelie Buret, Thales International. Ekatarina Stahlmann, Grundig Business Systems, took third place and a cash prize of €100. Ekatarina Stahlman is not new to the IPC Hand Soldering Competition at SMT Hybrid Packaging Exhibition as she was the first-place winner in 2015 and 2016.

Participants in the hand soldering competition were tasked with building a functional electronics assembly, a new design this year, within a 60-minute time limit. Master Instructor Trainers Rob and Stefan Walls, PIEK, and Hubert Huffschmitt, IFTEC, served as independent judges and evaluated each assembly based on workmanship, overall functionality, compliance with IPC-A-610 Class 3 criteria and speed to complete the PCB.

"The best-of-the-best hand soldering talent in Europe came to compete at this event," said David Bergman, IPC vice president of international relations. "The competition was tough, but each competitor rose to the challenge. We look forward to hosting more hand soldering competition across the globe."

Bergman added, "IPC would like to thank hand soldering competition gold sponsors: JBC, Kurtz Ersa, and Weller; silver sponsors: Almit, Balver Zinn, and NCAB Group; bronze sponsor: Piek; IFTEC and ULT and contest contributors: Mircosolder for their support."

IPC is planning to hold additional hand soldering competitions in Europe, later this year in October and November. Watch for announcements from IPC with locations and times.

Share


Suggested Items

HDI Considerations: Interview with ACDi's Garret Maxson

11/10/2017 | Stephen Las Marias, I-Connect007
Garret Maxson, manager of engineering services at American Computer Development Inc. (ACDi), discusses the PCB assembly challenges when dealing with high-density interconnect (HDI) boards, parameters to consider, and strategies to help facilitate a smooth assembly process when using HDI boards.

Reliability of ENEPIG by Sequential Thermal Cycling and Aging

11/06/2017 | Reza Ghaffarian, Jet Propulsion Laboratory, California Institute of Technology
Electroless nickel/electroless palladium/immersion gold (ENEPIG) surface finish for PCBs has now become a key surface finish that is used for both tin-lead and lead-free solder assemblies. This article presents the reliability of LGA component packages with 1156 pads assembled with tin-lead solder onto PCBs with an ENEPIG finish and then subjected to thermal cycling and then isothermal aging.

Achieving the Perfect Solder Joint: The Many Perspectives on Soldering

10/30/2017 | Stephen Las Marias, I-Connect007
For this month's issue of SMT Magazine, we brought several experts together to discuss the many aspects of soldering, from solder paste, to automation, inspection, and the challenges in achieving the perfect solder joint. We also talked about the strategies and parameters to consider to ensure reliable, good solder joints.



Copyright © 2017 I-Connect007. All rights reserved.