Eagle Electronics Invests in Quality and Reliability with ATG A7a Flying Probe Tester


Reading time ( words)

Eagle Electronics has recently placed an order for a new ATG A7a automatic flying probe tester. The new tester will allow Eagle to test 100% of their boards via flying probe. The strategy is to utilize the new machine as the testing workhorse while their existing three Microcraft flying probe machines will primarily be used for retest and verification. The intent is to continue to test in panel form for most products. In automatic mode, the new machine will segregate good and bad boards automatically.

Some key features of the A7A include:

  • fully automated test system for production and customized panel
  • for lights out operation
  • different type of products can be loaded in parallel
  • biggest panel size 650 mm x 535 mm
  • tension tools for automatic handling of flex boards down to 0.3 mm

The A7a machine also has the capability to test in Kalvin mode which can catch micro cracks and micro voids in small via structures through low ohm testing. This would not be the standard test, as it is considerably slower. However, on certain high layer count, HDI and high reliability boards it will be a beneficial capability. Delivery is expected late May.

President and CEO, Mike Kalaria stated, “As Eagle Electronics continues to grow at a rapid pace, it is important that we invest in our equipment and processes in order to meet the needs of our growing customer base. By implementing the A7a into our operations, we will not only increase the speed at which we are able to turn product, but it will also assure that everything we produce is top quality and free from any defects that could affect the customer’s final products.”

Delivery of the A7a is expected in late May in conjunction with the installation of two new Lenz drilling machines.

About Eagle Electronics

Since 1979, Eagle Electronics Inc. has provided our customers with the highest quality printed circuit boards at fair and competitive prices. From our modern 50,000 sq. ft. facility, we have been meeting and exceeding our customer's ever increasing expectations and requirements. From providing short standard lead times to very low premiums on quick turns we strive to provide the best total value in high technology rapid turn-around PCBs in the industry. Learn more at eagle-elec.com.

 

Share


Suggested Items

Viking: Covering the Globe with Value-Added Services

12/14/2017 | Barry Matties, I-Connect007
In the final hours of productronica 2017, Barry Matties met with Jake Kelly of Viking to discuss the company’s value-added services, their growth in the India and America markets, and the UCE manufactured line they displayed at productronica.

Global Impact on European PCB Fabrication: EIPC Summer Conference 2017, Day 1

06/14/2017 | Pete Starkey, I-Connect007
Electronics industry professionals from 13 countries, mainly from Europe and Scandinavia, others from the USA, but some from as far away as India and Japan, gathered in Meriden, the centre of England, for the EIPC Summer Conference.

HDP User Group 2017 European Meeting Highlights Technology Progress

06/06/2017 | Pete Starkey, I-Connect007
The conference facility at the offices of Oracle, in the royal burgh of Linlithgow in West Lothian, Scotland, was the venue for the 2017 European meeting of the High Density Packaging User Group. I was delighted and privileged to be invited once again to sit in on the open session, an intense programme of technical presentations and discussions, project reviews, status updates and new project proposals.



Copyright © 2017 I-Connect007. All rights reserved.