Lenthor Engineering Invests in Testing with CyberOptics SPI System
March 21, 2017 | CyberOptics CorporationEstimated reading time: Less than a minute
Lenthor Engineering recently installed a new CyberOptics SE500 solder paste inspection (SPI) system.
The SE500 will allow Lenthor to push inspection speeds to the highest level possible for even the most demanding assemblies without compromising on accuracy and dependability. The new system will help them to achieve high quality joints with accurate volume measurement every single time.
The SE500 provides 3-D height, volume and area measurements for boards with SCPs, micro-BGAs and other small pad sizes where volume is critical in joint reliability. The new system is also equipped with flexible circuit warp compensation algorithm to compensate for warp on complex shapes within a field of view.
David Moody, director of sales and marketing, said, "This machine is going to optimize our solder paste process, reduce rework and improve yield, allowing us to continue to enhance the service and support we provide to our customers."
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.