3D ICs Will Meet the Miniaturisation Demands of Next-Generation Electronics
March 1, 2017 | Frost & SullivanEstimated reading time: 2 minutes
With 2D integrated circuit (IC) technology nearing its scaling limit, there is an urgent need to scale up vertically to cope with the breakneck pace of advances in digital technologies. However, the progress made by the digital components has not been matched by the advances in microelectronic components, which has resulted in hindrances such as Memory Wall. In this scenario, 3D IC technology’s ability to help create high-performing, low-power-consuming microchips is proving invaluable.
The rising relevance of the Mega Trends of Internet of Things (IoT) and miniaturisation has made 3D ICs integral to modern-day electronic devices, as they enable:
- enhanced storage capability
- low power consumption
- efficient thermal management
- high-speed data transmission and processing
- high brightness lighting
- connected and smart devices
Future Opportunities for 3D Integrated Circuits is a recent analysis from Frost & Sullivan’s TechVision (Microelectronics) Growth Partnership Service program. The research covers major application areas for 3D ICs, including consumer electronics, ICT, automobiles, military, healthcare, aerospace, datacenters, gaming, biomedical devices, military equipment and wearable devices.
These capabilities have thrown open the application sectors of memory, microelectromechanical systems (MEMS) and sensors. They have also been a driving force in the emerging technologies of microfluidics and silicon photonics.
“3D ICs help shorten interconnect length as well as enhance signal speed while dissipating very little power,” noted Frost & Sullivan TechVision Research Analyst Brinda Manivannan. “The technological superiority of 3D ICs addresses the needs of the futuristic semiconductor industry by aiding in the development of high-density and multifunctional electronic components.”
While the advantages of 3D IC are many, manufacturers often have to overcome high development costs, technical limitations, wide prevalence of existing technologies and a highly unstructured supply chain. To combat these challenges, 3D IC companies have to find niche markets and streamline their supply chain horizontally to establish clear technological leadership.
“There has been significant interest among microelectronic companies all over the world in exploring 3D IC technology,” noted Manivannan. “Among regions, Asia-Pacific is witnessing the most heated R&D activity and among countries, the U.S. is at the top of the R&D leaderboard, followed by China. While U.S. R&D efforts are aimed at technology development, Asia-Pacific countries are mostly looking to scale the technology.”
About TechVision
Frost & Sullivan's global TechVision practice is focused on innovation, disruption and convergence, and provides a variety of technology-based alerts, newsletters and research services as well as growth consulting services. Its premier offering, the TechVision program, identifies and evaluates the most valuable emerging and disruptive technologies enabling products with near-term potential. A unique feature of the TechVision program is an annual selection of 50 technologies that can generate convergence scenarios, possibly disrupt the innovation landscape, and drive transformational growth.
About Frost & Sullivan
Frost & Sullivan, the Growth Partnership Company, works in collaboration with clients to leverage visionary innovation that addresses the global challenges and related growth opportunities that will make or break today's market participants. For more than 50 years, we have been developing growth strategies for the global 1000, emerging businesses, the public sector and the investment community. Contact us: Start the discussion
Suggested Items
Absolute EMS Successfully Recertifies ISO 9001:2015 and AS9100 Standards
03/26/2024 | Absolute EMS, Inc.Absolute EMS, Inc., an award-winning EMS provider of turnkey contract manufacturing services, is proud to announce the successful recertification of its ISO 9001:2015 and AS9100 Rev D SAE International Aerospace Standards.
Arlon EMC Receives IPC-4101 QPL Recertification
03/20/2024 | Arlon Electronic MaterialsArlon Electronic Materials has successfully completed an intensive two-day recertification audit by IPC Validation Services that examined Arlon’s manufacturing processes and testing procedures to assure that they are in conformance to the requirements of IPC-4101E-WAM1, the Specification for Base Materials for Rigid and Multilayer Printed Boards.
Northrop Grumman Honors Suppliers for Excellence
03/14/2024 | Northrop GrummanNorthrop Grumman Corporation honored more than 70 suppliers for their outstanding contributions in 2023. In an annual recognition event, the companies included women-, minority- and veteran-owned small businesses as well as those operating in underdeveloped areas.
Cicor Acquires TT Electronics IoT Solutions
03/04/2024 | Cicor Technologies Ltd.The Cicor Group has signed an agreement to acquire TT Electronics IoT Solutions Ltd, with three production sites in the UK and China.
AEM, Texas Aerospace Technologies Bolster Partnership for Latin America
02/26/2024 | AEM Corp.Canadian avionics manufacturer, Anodyne Electronics Manufacturing Corp. (AEM), is pleased to announce a partnership expansion with Texas Aerospace Technologies, a subsidiary of Texas Aerospace Services, to add AEM’s new MTP136D modern panel-mount P25 VHF FM Forest Service radio to its lineup of product offerings for their Latin American customers.