Ventec VT-901 Reliability Validated by Key Israeli Customers' HATS Testing
September 20, 2016 | VentecEstimated reading time: 1 minute
The reliability of Ventec International's VT-901 polyimide laminates, prepregs and low-flow prepregs has been conclusively demonstrated by Highly Accelerated Thermal Stress (HATS) testing by two leading PCB manufacturers in Israel.
PCB Technologies tested VT-901 materials in complex high layer-count rigid multilayer constructions, Eltek’s testing also included high layer count flex-rigid multilayers and VT-901 easily satisfied the test criteria in all examples.
Mark Goodwin, Ventec COO Europe and USA, said, "These remarkable HATS results, from two leading manufacturers of PCBs for military and aerospace applications, further demonstrate the thermal robustness of Ventec VT-901 polyimide and its suitability for use in high reliability rigid and flex rigid multi-layers in this demanding sector. Together with the AS9100 accreditation of our manufacturing and distribution facilities, these results clearly position Ventec as a world leader in the supply of high-reliability polyimide materials. We will now start with the next phase of our business development in Israel, which will involve the local stocking of materials to meet quick turn requirements of customers. This will be managed by our local agent and partner A.J. Englander (1980) Ltd."
For more information about Ventec's solutions and the company’s wide variety of products, please click here.
About Ventec International Group
With volume manufacturing facilities and HQ in Suzhou China, Ventec International specializes in advanced copper clad glass reinforced and metal backed substrates for the PCB industry. With distribution locations and quick-turn CCL manufacturing sites in both the US and Europe, Ventec International is a premier supplier to the Global PCB industry.
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?