The Government Circuit: Driving Resiliency and Economic Security on Both Sides of the Atlantic
American Made Advocacy: Taking the Fight to Capitol Hill
Defense Speak Interpreted: SWaPing Nanosatellites for Defense SystemsListen Up: Popular Podcast Series Returns With Discussion of Electroless Copper
May 16, 2024 | I-Connect007Estimated reading time: Less than a minute
In the latest episode of the podcast series, On the Line With: Designing for Reality, Nolan Johnson returns to Sunstone Circuits in Mulino, OR, to continue down the manufacturing process with Matt Stevenson.
Now it's time to start getting into the chemistry! In episode 6, Matt Stevenson describes the first key step in turning design data into physical reality—preparing the circuit board substrate material for fabrication. It's not as straightforward as you might think.
This series is all about the specifics that can affect your circuit board during the manufacturing process and includes tips and tricks for optimizing design, fabrication, yields, and cost.
I-Connect007 is committed to providing digital content that meets the needs of the electronics industry, including magazines, books, newsletters, market reports, podcasts, and event coverage. As the industry's longest-running digital media company, I-Connect007 is a leading publisher of original content for the global electronics industry.
Listen now and be sure to visit our educational resource center to access more free content.
Share on:
Suggested Items
Listen to I-Connect007’s Latest Podcast Episode: Empowering Electrical Engineers
05/23/2024 | I-Connect007I-Connect007 is thrilled to announce the release of the latest episode in Series 3 of its popular podcast, On the Line With... , available now on Apple and Spotify.
Listen to I-Connect007’s Latest Podcast Episode: Empowering Electrical Engineers
05/24/2024 | I-Connect007I-Connect007 is thrilled to announce the release of the latest episode in Series 3 of its popular podcast, On the Line With... , available now on Apple and Spotify.
On the Line With… Talks With Cadence Expert on SI/PI for PCB Designers
05/02/2024 | I-Connect007In “PCB 3.0: A New Design Methodology—SI/PI for PCB Designers,” subject matter expert Brad Griffin, Cadence Design Systems, discusses how an intelligent system design methodology can move some signal and power integrity decision-making into the physical design space, offering real-time feedback.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
On the Line With... Podcast Talks With Cadence Expert on Manufacturing
04/18/2024 | I-Connect007In “PCB 3.0: A New Design Methodology: Manufacturing” Patrick Davis returns to the podcast to talk about design rules. As design considerations become more and more complex, so, too, do the rulesets designers must abide by.