I-Connect007 Editor’s Choice: Five Must-Reads for the Week
August 25, 2023 | Nolan Johnson, I-Connect007Estimated reading time: 3 minutes
Here in the Pacific Northwest, we joke that there are only two seasons: “Winter” and “Road Construction.” Right now, we’re in the middle of Road Construction season. Seemingly every major highway, thoroughfare, and downtown core has big projects underway, racing to finish before the winter rains set in. Inconvenient and congested in the short term, things flow more smoothly once the buildout is completed, so there’s that. But that’s not the only place where I sense this trend.
Is it just me, or does it seem that we’re actively building out supply chain in North America? It’s always easiest to see what’s happening in your own neighborhood, and I happen to live in the United States, so while my perspective might be a bit skewed, I get the sense that Europe is having the same experience.
This week’s editor’s picks come from the top end of reader interest, so I don’t think it’s just me who’s sensing this kind of momentum. For example, we bring you a site visit to one of the newest PCB fabs in North America, and a captive facility at that. Nokia is now manufacturing sophisticated telecom optical components in the United States, and iNEMI publishes a roadmap assisting in specifying the right low-loss material for your particular application, among other topics. To wrap it up, we get NASA news that reminds us that we need not be a big corporation to participate in space programs.
Wearable Technology Market Size to Grow by $52.4 Billion from 2021 to 2026
Published August 21
No, apparently that’s not a typo in the headline for this article. Wearables are not projected to grow to $52.4 billon in the next three years, wearables are projected to grow by $52.5 billion. Exactly how is that expected to happen? Read it here.
A Look Inside SEL’s New PCB Factory
Published August 22
After years of planning, Schweitzer Engineering Laboratories is now manufacturing printed circuit boards in its new $100 million captive facility in Moscow, Idaho. I-Connect007’s Barry Matties recently toured the facility and posts this report on Schweitzer’s approach to building out a state-of-the-art greenfield facility in North America.
Nokia Expands Manufacturing in U.S.
Published August 21
Broadband fiber optical modules seem to be bringing Nokia back to the United States for manufacturing, defying the common belief that manufacturing optical modules is not possible in the U.S. This news item shares details on the “Who, What, Where, When, and Why” factoring into Nokia’s decision.
5G/6G MAESTRO Roadmap on Low Loss Dielectric Materials Characterization Available Online
Published August 18
From the article, “The International Electronics Manufacturing Initiative (iNEMI) announces the availability of the Low Loss Dielectric Materials Characterization Roadmap, which is part of the 5G/6G mmWave Materials and Electrical Test Technology Roadmap (5G/6G MAESTRO).” This resource matters because “advanced low loss materials often come with significant cost adders,” says Intel principal engineer, Michael Hill. Understanding when a design team is either under- or over-specifying material, can be critical in balancing BOM costs and performance.
NASA Selects Small Businesses for Orbital Debris, Surface Dust Tech
Published August 24
From the article, “NASA has selected six U.S. small businesses to receive nearly $20 million in total to advance technologies to address two challenges in space exploration: orbital debris and surface dust. During their contracts, the companies will produce prototypes to be demonstrated or used in spaceflight.
“Our missions require innovative solutions to overcome the complex challenges of spaceflight," said Jenn Gustetic, director of early-stage innovation and partnerships for NASA's Space Technology Mission Directorate (STMD) in Washington. “These small business projects could make big impacts toward solving some of the space industry’s longstanding obstacles.”
There is much more to this story.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.