Georgia Tech Researchers Support DARPA’s New 'CHIPS' Initiative
October 5, 2017 | Georgia TechEstimated reading time: 4 minutes
A team of Georgia Tech researchers is bringing electronic design software and communications expertise to DARPA's new CHIPS initiative, which will enable future generations of integrated circuits to be assembled from plug-and-play modules known as “chiplets.” Reusing blocks of existing microelectronics technology could reduce the need to design complex monolithic chips from scratch for new applications.
By allowing components such as memory modules or signal processors to be easily fitted together like the parts of a jigsaw puzzle, the initiative could help reduce the cost of new ICs for Department of Defense (DoD) agencies and accelerate the application of new technology. While the initiative is driven by DoD needs for its ships, tanks and aircraft, innovations developed by the program could also reduce the cost of developing low-volume specialized devices in the commercial world.
“The goal of this program is to make the design more modular so we can reuse existing components, making the design process much faster, easier and cheaper,” said Sung Kyu Lim, a School of Electrical and Computer Engineering professor who heads up Georgia Tech’s part of the initiative. “We’ll be able to create new chips to meet specific needs by reusing these chiplets and putting them together in modular fashion. The modular design will allow us to pick and choose the components we need for specific applications.”
Monolithic integrated circuits like those that go into smartphones contain billions of transistors. They cost tens to hundreds of millions of dollars and take months to design. Companies selling large volumes of consumer products can afford that design cost, but DoD agencies that need smaller numbers of specialized devices are looking for ways to reduce the design cost and time required.
Enter DARPA’s Common Heterogeneous Integration and Intellectual Property Reuse Strategies (CHIPS) effort, which will use interposer technology – a silicon and copper interface – that will interconnect the chiplets. While the interposer adds a level of complexity to the design of the devices, it’s necessary to facilitate the 3-D modular assembly. The chiplets themselves could arise from existing designs, with engineers modifying memory, signal processing and other blocks from ICs already in production.
“Instead of designing a whole new chip, you can borrow from what’s already been designed to put together a new chip quickly and at lower cost,” said Lim, who holds the Dan Fielder Endowed Chair. The chiplets would be assembled and then packaged together, facilitating shorter interconnect lengths that would reduce communication time and energy consumption between the components. The modular nature of the chiplets would also allow a block to be replaced by new technology without redesigning an entire IC.
The four-year CHIPS effort involves 11 teams, including major defense contractors, microelectronics companies, design firms – and two other universities: the University of Michigan and North Carolina State University. In addition to Lim, the Georgia Tech effort will involve three other faculty members: Pippin Chair Professor Madhavan Swaminathan, Professor Saibal Mukhopadhyay and Assistant Professor Tushar Krishna, all from the School of Electrical and Computer Engineering.
About $3.7 million will come to Georgia Tech as part of the project’s budget. In addition to the faculty members, that will fund a research engineer and up to eight graduate students.
The Georgia Tech team will provide electronic design automation software needed to produce the chiplets, develop translator technology that will allow chiplets operating in different languages to communicate, and evaluate different design standards brought to the project by other teams.
- Circuit design tools will be needed to create the chiplets, many of which will be adapted from existing designs. “A big part of what we’ll deliver for this project is electronic design automation (EDA) tools,” said Lim. “We want to automate the entire chiplet generation and integration process as much as possible using algorithms and software tools.”
- Modules from different companies may use different languages. To use them together in a new system, the chiplets will need translators, circuitry and software that will wrap around each chiplet. “We need to understand all the different languages, so we can help the chiplets communicate with one another,” Lim explained. “The complexity will depend on how many interface protocols are used in the system.”
- The project teams will have to work together using the same design standards. Lim’s team will establish tools and techniques for evaluating the different standards now used by different teams that are part of the overall effort. “We will provide a fair means of comparing the different technology options and picking the winner,” said Lim.
Though DARPA’s focus is on providing technology for DoD users, solutions developed from the initiative could also have broad benefits in the commercial microelectronics world. “Small- and medium-sized companies could will benefit a lot from this,” Lim said. “Small design houses that would like to develop their own ICs will likely be very interested.”
Meeting the program’s ambitious goals will be challenging, Lim says, with reliability, power, mechanical and thermal issues on the horizon. “The success of this program will make a significant contribution to the defense industry and the microelectronics community in general,” he said.
Suggested Items
Designer’s Notebook: What Designers Need to Know About Manufacturing, Part 2
04/24/2024 | Vern Solberg -- Column: Designer's NotebookThe printed circuit board (PCB) is the primary base element for providing the interconnect platform for mounting and electrically joining electronic components. When assessing PCB design complexity, first consider the component area and board area ratio. If the surface area for the component interface is restricted, it may justify adopting multilayer or multilayer sequential buildup (SBU) PCB fabrication to enable a more efficient sub-surface circuit interconnect.
Insulectro’s 'Storekeepers' Extend Their Welcome to Technology Village at IPC APEX EXPO
04/03/2024 | InsulectroInsulectro, the largest distributor of materials for use in the manufacture of PCBs and printed electronics, welcomes attendees to its TECHNOLOGY VILLAGE during this year’s IPC APEX EXPO at the Anaheim Convention Center, April 9-11, 2024.
ENNOVI Introduces a New Flexible Circuit Production Process for Low Voltage Connectivity in EV Battery Cell Contacting Systems
04/03/2024 | PRNewswireENNOVI, a mobility electrification solutions partner, introduces a more advanced and sustainable way of producing flexible circuits for low voltage signals in electric vehicle (EV) battery cell contacting systems.
Heavy Copper PCBs: Bridging the Gap Between Design and Fabrication, Part 1
04/01/2024 | Yash Sutariya, Saturn Electronics ServicesThey call me Sparky. This is due to my talent for getting shocked by a variety of voltages and because I cannot seem to keep my hands out of power control cabinets. While I do not have the time to throw the knife switch to the off position, that doesn’t stop me from sticking screwdrivers into the fuse boxes. In all honesty, I’m lucky to be alive. Fortunately, I also have a talent for building high-voltage heavy copper circuit boards. Since this is where I spend most of my time, I can guide you through some potential design for manufacturability (DFM) hazards you may encounter with heavy copper design.
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?