NEO Tech-built Battery Packs Successfully Launched into Space, Installed at ISS
January 26, 2017 | NEO TechEstimated reading time: 2 minutes
NEO Tech has announced that six Lithium-ion Battery Orbital Replacement Units (ORUs) that it assembled for Aerojet Rocketdyne were launched into space for the International Space Station (ISS) on December 9, 2016, with the first three successfully installed in the ISS on January 6, 2017. The new battery cell used in the ORUs is a third-generation of Li-ion cell that is designed specifically for space.
In early 2014, NEO Tech invested in and expanded its Chatsworth facility to produce large-form-factor, high-reliability products for use in mission-critical applications like manned space flight. Aerojet Rocketdyne selected NEO Tech to be its manufacturing supplier on the Li-ion battery ORU program because NEO Tech offered a compelling manufacturing solution and was within close proximity to Aerojet Rocketdyne, enabling close collaboration and concurrent engineering to facilitate timely completion of the product for launch. The company also was able to develop a specialized selective soldering process to solve challenges with very large buss bar lamination. NEO Tech invested in the production infrastructure to build, inspect and test the ORU to meet stringent manned space flight requirements. NEO Tech processes were certified by Aerojet Rocketdyne and NASA, including process certification of production personnel. Then the ORUs were delivered to Aerojet Rocketdyne for final acceptance testing before being delivered to the Boeing and NASA customer.
The Li-Ion ORUs were placed aboard Kounotori 6, an unpiloted HTV cargo carrier on top of the Japanese H-2B rocket, on a specially-designed pallet destined to carry the ORUs which will replace a portion of the International Space Station’s aging nickel-hydrogen batteries. The new batteries are lighter and more efficient – one lithium-ion unit is capable of replacing two of the old models. The first three units were successfully installed outside the space station’s right-side S4 power truss, one of the laboratory’s four main solar array modules. The installation was conducted during the first spacewalk of the New Year by NASA Astronauts. Eighteen additional batteries will be sent to the space station over the next four years.
About NEO Tech
NEO Tech combines the strengths of three leading contract manufacturers: NATEL, EPIC, and OnCore. With over 40 years of heritage in electronics manufacturing, NEO Tech focuses on low-medium-volume/high-mix, high-complexity products primarily in the medical, defense/aerospace and industrial markets.
NEO Tech offers full product lifecycle engineering services, manufacturing and testing of microelectronics, cable & harness interconnect products, PCBA, full box build services and aftermarket repair and fulfillment services. The companies that form NEO Tech have been known for solving tough engineering problems that result in high-reliability, high-quality electronic solutions for customers.
Headquartered in Chatsworth, CA, NEO Tech has manufacturing and engineering locations in California, Colorado, Illinois, Massachusetts, Nevada, Ohio, Tennessee, Mexico, and China. NEO Tech holds and maintains industry specific certifications that include ISO9001, AS9100, ISO13485, ISO/TS16949, ISO14001 and MIL-PRF-38534. To learn more, visit www.NEOTech.com.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.