Taking a Leap in Bioinspired Robotics
December 16, 2016 | MITEstimated reading time: 7 minutes
In the not so distant future, first responders to a disaster zone may include four-legged, dog-like robots that can bound through a fire or pick their way through a minefield, rising up on their hind legs to turn a hot door handle or punch through a wall.
Such robo-rescuers may be ready to deploy in the next five to 10 years, says Sangbae Kim, associate professor of mechanical engineering at MIT. He and his team in the Biomimetic Robotics Laboratory are working toward that goal, borrowing principles from biomechanics, human decision-making, and mechanical design to build a service robot that Kim says will eventually do “real, physical work,” such as opening doors, breaking through walls, or closing valves.
“Say there are toxic gases leaking in a building, and you need to close a valve inside, but it’s dangerous to send people in,” Kim says. “Now, there is no single robot that can do this kind of job. I want to create a robotic first responder that can potentially do more than a human and help in our lives.”
To do this, Kim, who was awarded tenure this year, is working to fuse the two main projects in his lab: the MIT Cheetah, a four-legged, 70-pound robot that runs and jumps over obstacles autonomously; and HERMES, a two-legged, tele-operated robot, whose movements and balance are controlled remotely by a human operator, much like a marionette or a robotic “Avatar.”
“I imagine a robot that can do some physical, dynamic work,” Kim says. “Everybody is trying to find overlapping areas where you’re excited about what you’re working on, and it’s useful. A lot of people are excited to watch sports because when you watch someone moving explosively, it is hypothesized to trigger the brain’s ‘mirror neurons’ and you feel that excitement at the same time. For me, when my robots perform dynamically and balance, I get really excited. And that feeling has encouraged my research.”
A drill sergeant turns roboticist
Kim was born in Seoul, South Korea, where he says his mother remembers him as a tinkerer. “Everything with a screw, I would take apart,” Kim says. “And she said the first time, almost everything broke. After that, everything started working again.”
He attended Yonsei University in the city, where he studied mechanical engineering. In his second year, as has been mandatory in the country, he and other male students joined the South Korean army, where he served as a drill sergeant for two and a half years.
“We taught [new recruits] every single detail about how to be a soldier, like how to wear shirts and pants, buckle your belt, and even how to make a fist when you walk,” Kim recalls. “The day started at 5:30 a.m. and didn’t end until everyone was asleep, around 10:30 p.m., and there were no breaks. Drill sergeants are famous for being mean, and I think there’s a reason for that — they have to keep very tight schedules.”
After fulfilling his military duty, Kim returned to Yonsei University, where he gravitated toward robotics, though there was no formal program in the subject. He ended up participating in a class project that challenged students to build robots to perform specific tasks, such as capturing a flag, and then to compete, bot to bot, in a contest that was similar to MIT’s popular Course 2.007 (Design and Manufacturing), which he now co-teaches.
“[The class] was a really good motivation in my career and made me anchor on the robotic, mechanistic side,” Kim says.
A bioinspired dream
In his last year of college, Kim developed a relatively cheap 3-D scanner, which he and three other students launched commercially through a startup company called Solutionix, which has since expanded on Kim’s design. However, in the early stages of the company’s fundraising efforts, Kim came to a realization.
“As soon as it came out, I lost excitement because I was done figuring things out,” Kim says. “I loved the figuring-out part. And I realized after a year of the startup process, I should be working in the beginning process of development, not so much in maturation of products.”
After enabling first sales of the product, he left the country and headed for Stanford University, where he enrolled in the mechanical engineering graduate program. There, he experienced his first taste of design freedom.
“That was a life-changing experience,” Kim says. “It was a more free, creativity-respecting environment — way more so than Korea, where it’s a very conservative culture. It was quite a culture shock.”
Kim joined the lab of Mark Cutkosky, an engineering professor who was looking for ways to design bioinspired robotic machines. In particular, the team was trying to develop a climbing robot that mimicked the gecko, which uses tiny hairs on its feet to help it climb vertical surfaces. Kim adapted this hairy mechanism in a robot and found that it worked.
“It was 2:30 a.m. in the lab, and I couldn’t sleep. I had tried many things, and my heart was thumping,” Kim recalls. “On some replacement doors with tall windows, [the robot] climbed up smoothly, using the world’s first directional adhesives, that I invented. I was so excited to show it to the others, I sent them all a video that night.”
He and his colleagues launched a startup to develop the gecko robot further, but again, Kim missed the thrill of being in the lab. He left the company soon after, for a postdoc position at Harvard University, where he helped to engineer the Meshworm, a soft, autonomous robot that inched across a surface like an earthworm. But even then, Kim was setting his sights on bigger designs.
“I was moving away from small robots, because it’s very difficult for them do to real, physical work,” Kim says. “And so I decided to develop a larger, four-legged robot for human-level physical tasks — a long-term dream.”
Page 1 of 2
Suggested Items
iNEMI Packaging Tech Topic Series: Role of EDA in Advanced Semiconductor Packaging
04/26/2024 | iNEMIAdvanced semiconductor packaging with heterogenous integration has made on-package integration of multiple chips a crucial part of finding alternatives to transistor scaling. Historically, EDA tools for front-end and back-end design have evolved separately; however, design complexity and the increased number of die-to-die or die-to-substrate interconnections has led to the need for EDA tools that can support integration of overall design planning, implementation, and system analysis in a single cockpit.
Cadence, TSMC Collaborate on Wide-Ranging Innovations to Transform System and Semiconductor Design
04/25/2024 | Cadence Design SystemsCadence Design Systems, Inc. and TSMC have extended their longstanding collaboration by announcing a broad range of innovative technology advancements to accelerate design, including developments ranging from 3D-IC and advanced process nodes to design IP and photonics.
Ansys, TSMC Enable a Multiphysics Platform for Optics and Photonics, Addressing Needs of AI, HPC Silicon Systems
04/25/2024 | PRNewswireAnsys announced a collaboration with TSMC on multiphysics software for TSMC's Compact Universal Photonic Engines (COUPE). COUPE is a cutting-edge Silicon Photonics (SiPh) integration system and Co-Packaged Optics platform that mitigates coupling loss while significantly accelerating chip-to-chip and machine-to-machine communication.
Siemens’ Breakthrough Veloce CS Transforms Emulation and Prototyping with Three Novel Products
04/24/2024 | Siemens Digital Industries SoftwareSiemens Digital Industries Software launched the Veloce™ CS hardware-assisted verification and validation system. In a first for the EDA (Electronic Design Automation) industry, Veloce CS incorporates hardware emulation, enterprise prototyping and software prototyping and is built on two highly advanced integrated circuits (ICs) – Siemens’ new, purpose-built Crystal accelerator chip for emulation and the AMD Versal™ Premium VP1902 FPGA adaptive SoC (System-on-a-chip) for enterprise and software prototyping.
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.